Prestigio MultiPad 2 Pro Duo 8.0 3G

Home/ Prestigio/ Phones/ MultiPad 2 Pro Duo 8.0 3G

Table of Contents

Summary

Prestigio MultiPad 2 Pro Duo 8.0 3G Price

At the time of it's release in 2013, the manufacturer's retail price for a new Prestigio MultiPad 2 Pro Duo 8.0 3G was about 200 EUR.

The retail price of a new or used/second hand Prestigio MultiPad 2 Pro Duo 8.0 3G varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Prestigio MultiPad 2 Pro Duo 8.0 3G across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of Prestigio MultiPad 2 Pro Duo 8.0 3G?

4000 mAh

How to reset or factory restore Prestigio MultiPad 2 Pro Duo 8.0 3G device?

There are several ways to reset or factory reset a Prestigio MultiPad 2 Pro Duo 8.0 3G device. However, before proceeding with any of these methods, it is important to back up any important data that you may have on the device. Method 1: Using the Device itself 1. Remove the SIM card and SD card if you have one. 2. Press and hold the Power button and the Volume Down button simultaneously for a few seconds until the device enters Recovery Mode. 3. Once in Recovery Mode, use the Volume buttons to navigate to and select "Wipe data/factory data". 4. Confirm the action by selecting "Yes - Delete all user data". 5. Wait for the device to complete the data cleaning process. 6. Once the process is complete, select "Reboot system". 7. The device will restart and you will be prompted to set up the device as if it's new. Method 2: With a Computer 1. Connect your Prestigio MultiPad 2 Pro Duo 8.0 3G device to your computer using a USB cable. 2. Install the Prestigio device driver on your computer. 3. Open a command prompt and navigate to the folder where the Prestigio device driver is installed. 4. Type the following command and press Enter: lsass.exe /t /d PrestigioMultiPad2ProDuo803G /f 1. Wait for the command to complete and then type the following command and press Enter: clsass.exe /t /d PrestigioMultiPad2ProDuo803G /f /d donotremovefiles 1. Restart your device and enter Recovery Mode. 2. Follow the steps provided in Method 1 to reset the device. Please note that both methods above will erase all data on the device, so use these methods with caution. Also, the device will be unlocked after reset, so you may need to contact your service provider to activate it again.