How to reset or factory restore Posh Orion Mini S350 device?
POSH Orion Mini S350 is a device that runs on the POSH OS operating system. This is a specialized operating system designed for end-point data storage and management, making it an ideal choice for businesses that require secure storage of sensitive data. In the event that you need to reset or factory restore your POSH Orion Mini S350 device, there are two recommended ways to do so. Here are the steps to follow:
Method 1: Resetting using advanced POSH utility
The first method is to use the advanced POSH utility to reset the device. Follow these steps:
1. Connect your device to your computer using a USB cable.
2. Install the POSH utility on your computer. This can be downloaded from the GenExus website.
3. Connect the POSH device to your computer and make sure that the USB connection is recognized.
4. Run the POSH utility on your computer.
5. Select the "Reset" option and follow the instructions provided by the utility.
6. Once the reset is complete, disconnect the device from the computer and wait for it to start up.
Method 2: Factory resetting using hardware button
The second method is to use the hardware button to factory reset the device. Follow these steps:
1. Turn off the device by pressing and holding the power button until the device turns off.
2. Press and hold the reset button for 30 seconds. This is the hardware button located on the device.
3. When you release the reset button, wait for the device to start up.
4. During the startup process, the device will prompt you to accept the factory reset.
5. Press the "Yes" button to proceed with the factory reset.
6. Once the factory reset is complete, the device will restart and prompt you to create a new password.
Note: Before proceeding with either method, it is important to backup any important data that you have stored on the device. This will ensure that you do not lose any important data during the reset or factory restore process. Additionally, it is recommended to only use one method at a time to avoid any potential compatibility issues that may arise.
