Plum Hero

Home/ Plum/ Phones/ Hero

Table of Contents

Summary

Plum Hero Price

The retail price of a new or used/second hand Plum Hero varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Plum Hero across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery life of the Plum Hero?

The Plum Hero has a battery life of up to 12 hours.

What type of processor does the Plum Hero have?

The Plum Hero has a Qualcomm Snapdragon 636 processor.

What type of display does the Plum Hero have?

The Plum Hero has a 5.7 inch HD display.

How to reset or factory restore Plum Hero device?

Resetting or factory restoring a Plum Hero device can be useful if you are experiencing issues with the device, or if you want to start fresh and set up the device from scratch. There are two common methods for resetting or factory restoring a Plum Hero device: using the built-in recovery mode or using a computer to flash the device with new firmware. 1. Using built-in recovery mode: Before starting the reset process, make sure to back up any important data to an external storage device. To enter recovery mode, turn off the device and press and hold the volume down button while turning the device back on. Once in recovery mode, use the volume buttons to navigate through the options and select the "Wipe data/factory reset" option. Confirm the selection and wait for the device to completely reset. Once the reset process is complete, the device will restart and prompt you to set it up as a new device. Note that using the built-in recovery mode can erase all data on the device, so make sure to back up any important data before proceeding. 2. Using a computer: To reset or factory restore a Plum Hero device using a computer, you will need a compatible USB cable and a computer with the appropriate software. First, download and install the Plum Hero software from the manufacturer's website. Then, connect the device to the computer using the USB cable and select the device from the list of connected devices. Once connected, select the "Developer Options" option in the device settings and then select "Project settings" and "Upload PKG to device". Browse for the firmware file from the manufacturer's website and click "Upload" to begin the reset process. Once the process is complete, the device will restart and prompt you to set it up as a new device. Note that using a computer to reset or factory restore a device can erase all data on the device, so make sure to back up any important data before proceeding. It's also important to use the correct firmware file for your device and to follow the manufacturer's instructions carefully to avoid any potential issues.