How to reset or factory restore Plum Glow device?
Sure, here are the most common and recommended ways to reset or factory restore a Plum Glow device:
1. Using Recovery Mode:
a. Turn off your Plum Glow device.
b. Press and hold the Volume Up key and the Power button simultaneously for about 10 seconds until the Recovery Mode menu appears.
c. Using the Volume keys, navigate to "Wipe data/factory reset" and press the Power button to select it.
d. Confirm by selecting "Yes - delete all user data" with the Volume keys and pressing the Power button.
e. The device will now begin to reset and you will see a progress bar.
2. Using the Reset Password:
a. Turn off your Plum Glow device.
b. Press and hold the Volume Up key and the Power button simultaneously for about 10 seconds until the Recovery Mode menu appears.
c. Using the Volume keys, navigate to "Reset password" and press the Power button to select it.
d. Enter the current password when prompted.
e. If the password is incorrect, you will need to enter the reset password. This can typically be found in your Plum Glow device manual or on the manufacturer's website.
3. Using OTA Update:
a. Go to Settings > System and tap on OTA Update.
b. If there is an update available, tap on Download and Install.
c. Once the update is installed, tap on Reboot system now.
d. After the device has rebooted, go to Settings > System and tap on About Phone.
e. You can confirm that the device has been reset by checking the software version number, which should now be the latest version.
Note: Resetting or factory restoring your Plum Glow device will erase all data and settings on the device. It is recommended to backup all important data and settings before resetting your device. Additionally, the recovery process may take some time, depending on the size of the device and the speed of your internet connection.
