How to reset or factory restore a Asus Zenfone 10 device?
There are two methods to reset or factory restore a Zenfone 10 device, which are as follows:
Method 1: Using Recovery Mode
To perform a factory reset using recovery mode, follow these steps:
1. Connection: Connect your Zenfone 10 device to your computer using a USB cable.
2. Drivers: Make sure that the correct drivers for your device are installed on your computer. You can install the drivers from the Asus website or by downloading it from the official Android SDK platform.
3. Backup: Before proceeding, make sure you back up all your important data, messages, contacts, settings, and apps.
4. Boot into recovery mode: Turn off your device and press and hold the Power button along with the Volume Up button for about 10-20 seconds until you see the bootloader screen. Release both buttons and press the Back button to enter recovery mode.
5. Wipe data/factory reset: Once you are in recovery mode, select the "Wipe Data/Factory Reset" option using the volume buttons and the Power button. Then, select "Yes" to confirm the action. This will erase all the data and settings on your device and revert it back to its factory state.
6. Reboot: After the reset is complete, select "Reboot system now" and wait for your device to reboot.
7. Set up: As your device boots up, follow the onscreen instructions to set up your device, apply any necessary firmware updates, and restore your data and apps from your backup.
Method 2: Using Android Stock ROM
Another method to reset or factory restore your Zenfone 10 device is by using the Android Stock ROM. This method requires advanced technical skills and a good understanding of Android recovery tools. However, it is the most suitable method if you want to return your device to its original, pristine state.
To perform a factory reset using Android Stock ROM, follow these steps:
1. Connection: Connect your Zenfone 10 device to your computer using a USB cable.
2. Drivers: Make sure that the correct drivers for your device are installed on your computer. You can install the drivers from the Asus website or by downloading it from the official Android SDK platform.
3. Backup: Back up all your important data, messages, contacts, settings, and apps.
4. Download: Download the latest Android Stock ROM for your Zenfone 10 device from a reliable source.
5. Reboot into recovery mode: Turn off your device and press and hold the Power button along with the Volume Up button for about 10-20 seconds until you see the bootloader screen. Release both buttons and press the Back button to enter recovery mode.
6. Select bootloader: Select the "Bootloader" option from the recovery menu.
7. Flash ROM: Connect your device to your computer, and then select the "Flash ROM from SD card" option. Select the Android Stock ROM file you downloaded and wait for it to flash onto your device. This will restore your device to its factory state.
8. Reboot: After the flashing process is complete, select "Reboot system now" and wait for your device to reboot.
9. Set up: As your device boots up, follow the onscreen instructions to set up your device, apply any necessary firmware updates, and restore your data and apps from your backup.
Note: It is important to note that using Android Stock ROM may void your device's warranty and could potentially harm your device if the wrong file is flashed. It is important to perform this process only if you are comfortable with it and have the necessary technical knowledge.
