How to reset or factory restore Philips X130 device?
Philips X130 is a smart speaker that runs on Rovi OS, which means it has the option to reset or factory restore to its factory setting. Here are the most common and recommended ways to reset or factory restore a Philips X130 device:
1. Reset WPA2 Wireless Network: If you are looking to reset the device’s WiFi settings, you can follow these steps:
- Say "WiFi settings" to your Philips X130 speaker.
- Wait until it finishes loading the WiFi settings menu.
- If you see an “Invalid Settings” message, select “Reset WiFi” and wait for the device to restart.
2. Factory Reset: If you need to reset your Philips X130 device to its factory settings, you can follow these steps:
- Press and hold the volume up button for 5 seconds until you hear a beep.
- Then, press and hold the volume down button for another 5 seconds until you hear a second beep.
- Release the volume down button and wait for the device to restart.
3. Reset WiFi: If you need to reset the Philips X130 device's WiFi settings to their factory settings, you can follow these steps:
- Say "WiFi settings" to your Philips X130 speaker.
- Wait until it finishes loading the WiFi settings menu.
- If you see an “Invalid Settings” message, select “Reset WiFi” and wait for the device to restart.
4. Reset to Default: If you want to reset all the default settings, you can use the following factory reset:
- Press and hold the volume up button for 5 seconds until you hear a beep.
- Then, press and hold the volume down button for another 5 seconds until you hear a second beep.
- Release the volume down button and wait for the device to restart.
Note: All the steps above are applicable to all Philips X130 devices running on Rovi OS. However, if your device has an updated ROM, you may need to refer to the manufacturer's manual for additional instructions.
