How to reset or factory restore Philips Fisio 120 device?
When it comes to resetting or factory restoring a Philips Fisio 120 device, there are several options available to you. Here are the most common and recommended ways to do it:
1. Via the Device Manager
You can reset your Philips Fisio 120 device using your PC's Device Manager. To do this, follow these steps:
* Connect your Philips Fisio 120 device to your computer via USB cable.
* Optionally, disconnect any other peripherals connected to the computer to avoid interference.
* Open the Device Manager by pressing the Windows key + X and selecting Device Manager from the list.
* In the Device Manager, locate your Philips Fisio 120 device in the list of devices.
* Right-click on the device and select Remove.
* A confirmation window will appear. Click Yes to proceed with the removal.
* Wait for the device to be properly removed.
* Once the device has been removed, exit the Device Manager.
* Unplug the Philips Fisio 120 device from the computer.
* Wait for a few minutes to allow the device to completely disconnect from the computer.
* Reconnect the device to your computer via USB cable.
* Open your music software (such as iTunes) and select your Philips Fisio 120 device from the list of available devices.
* If prompted, select "Trust This Computer" on the device's pairing screen.
* Your device should now appear in your music software as though it's been reset to its factory settings.
2. Via a USB Reset Tool
You can also reset your Philips Fisio 120 device using a USB reset tool. There are several different tools available for this purpose, including recovery disks from Philips themselves.
To use a USB reset tool, follow these steps:
* Download the recovery tool for your Philips Fisio 120 device from the Philips website or other reputable source.
* Connect your Philips Fisio 120 device to your computer via USB cable.
* Open the downloaded tool and follow the prompts to begin the recovery process.
* Wait for the tool to finish the recovery process.
* Disconnect the USB cable from the device and wait for any remaining files to be transferred to your computer.
* Otherwise, plug your device back into the computer and into speakers, and you're good to go!
3. Via a Hard Reset
You can also perform a hard reset on your Philips Fisio 120 device to reset it to its factory settings. However, note that this method may permanently delete any personal data or settings on your device, so use caution.
To perform a hard reset, follow these steps:
* Connect your Philips Fisio 120 device to your computer via USB cable.
* Optionally, disconnect any other peripherals connected to the computer to avoid interference.
* Turn off your device.
* Press and hold the power button for at least ten seconds.
* Release the power button.
* Turn on your device.
* Connect your device to your music software (such as iTunes) and select your device from the list of available devices.
* If prompted, select "Trust This Computer" on the device's pairing screen.
* Your device should now appear in your music software as though it's been reset to its factory settings.
Remember, to use the recommended method only if you've exhausted all other options or if your Philips Fisio 120 device isn't functioning properly.
