Philips D812

Home/ Philips/ Phones/ D812
Philips D812 image - Nikonet125.com
An image of the Philips D812.
Table of Contents


The Philips D812 is a discontinued smartphone with a 2.4 inch TFT display, a 0.3 MP camera, and a microSD card slot for storage expansion. It runs on the Android operating system and has a battery life of up to 8 hours of talk time.

Philips D812 Price

The retail price of a new or used/second hand Philips D812 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Philips D812 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery life of the Philips D812?

The Philips D812 has a battery life of up to 8 hours.

How to reset or factory restore Philips D812 device?

Sure, here are the most common and recommended ways to reset or factory restore a Philips D812 device: 1. Power reset Turn off the device and unplug it from power for a few minutes. Then, plug the device back into power and turn it back on. This will erase all the data stored on the device. 2. OTA or WiFi reset If your device supports Over-the-Air (OTA) or WiFi reset, you can use the Philips Hue app to reset the device. Open the app and go to the settings section. Tap on "Firmware Update" and select "Reset to defaults". This will erase all the data stored on the device and bring it back to the default settings. 3. Ethernet reset If your device supports Ethernet reset, you can use a computer or laptop to reset the device. Connect the device to the computer or laptop using an Ethernet cable. Then, open a command prompt and type "scagen [Name of the light fixture]". This will factory reset the device. 4. Manual factory reset This method requires a Phillips D812 controller or a compatible device that supports Philips D812 control. Follow these steps: * Turn off the device. * Connect the controller to the device using the Philips D812 controller cables. * Turn on the controller by pressing and holding the "Select" button for around 10 seconds until the LED starts flashing. * The LED should now flash rapidly. Direct the controller towards the device and press the "Select" button until the LED stops flashing. * Disconnect the controller from the device. * The device should now be at the default settings, and you can program it as required. Note: Be careful when resetting the device, as it will erase all the data stored on the device. It is recommended to reset the device only when it is malfunctioning or when you want to start over.

What type of display does the Philips D812 have?

The Philips D812 has a 5.0-inch HD IPS display.

What is the processor of the Philips D812?

The Philips D812 is powered by a 1.2GHz quad-core processor.


Specifications

Network

TechnologyGSM / CDMA / EVDO
2G bandsGSM 900 / 1800
CDMA 800
3G bandsCDMA2000 1xEV-DO
SpeedEV-DO Rev. 0

Launch

Announced2011, February. Released 2011, February
StatusDiscontinued

Body

Dimensions109.6 x 55.2 x 14 mm (4.31 x 2.17 x 0.55 in)
Weight125 g (4.41 oz)
SIMMini-SIM

Display

TypeTFT resistive touchscreen, 65K colors
Size3.2 inches, 29.1 cm2 (~48.2% screen-to-body ratio)
Resolution240 x 400 pixels, 5:3 ratio (~146 ppi density)
Handwriting recognition

Memory

Card slotmicroSDHC (dedicated slot), 2 GB included
PhonebookYes, Photocall
Call recordsYes
Internal130MB

Main Camera

Single3.15 MP, AF
VideoYes

Selfie camera

No

Sound

LoudspeakerYes
3.5mm jackNo

Comms

WLANNo
Bluetooth2.1, A2DP
PositioningGPS, A-GPS
RadioNo
USBmicroUSB 2.0

Features

SensorsAccelerometer
MessagingSMS, MMS, Email, IM
BrowserWAP 2.0/xHTML
GamesYes
JavaNo
MP3/AAC+ player MP4/H.263 player Organizer Voice memo Predictive text input

Battery

TypeRemovable Li-Ion 1100 mAh battery
Stand-byUp to 100 h
Talk timeUp to 3 h 10 min

Misc

ColorsBlack

Other Philips phones like the D812