Pantech Pocket P9060

Home/ Pantech/ Phones/ Pocket P9060

Table of Contents

Summary

Pantech Pocket P9060 Price

At the time of it's release in 2011, December, the manufacturer's retail price for a new Pantech Pocket P9060 was about 280 EUR.

The retail price of a new or used/second hand Pantech Pocket P9060 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Pantech Pocket P9060 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

How to reset or factory restore Pantech Pocket P9060 device?

To reset or factory restore a Pantech Pocket P9060 device, you can follow either of these two methods: Method 1: Hard Reset ---------------- 1. Power off the device by pressing and holding the power key for at least 10 seconds until the device shuts down completely. 2. Press and hold the Volume Up key and the Power key simultaneously for at least 10 seconds until the device enters the Bootloader mode. 3. Once the Bootloader mode is activated, use the Volume keys to highlight the "Factory Reset" option and press the Power key to select it. 4. Enter your PIN or Password when prompted and press the Power key to confirm. 5. Wait for the device to reset and restart, which might take a few minutes. Method 2: Factory Restore ------------------------- 1. Connect your Pantech Pocket P9060 device to your computer using a USB cable and activate USB debugging on your device. 2. Download and install the latest version of the Pantech Drivers for your device from the Pantech website or from your computer's manufacturer website. 3. Open a command prompt on your computer and navigate to the folder where the Pantech Drivers are installed. 4. Type in the following command and press Enter: `adb devices` to list all connected devices. 5. Identify your device's serial number or USB device number and remember it. 6. Type in the following command and press Enter: `adb reboot bootloader` to reboot the device into the Bootloader mode. 7. Once the Bootloader mode is activated, use the Volume keys to highlight the "Fast Boot Mode" option and press the Power key to select it. 8. Connect your device to your computer using the USB cable and select "Fast Boot" from the menu that appears. 9. Choose "Recovery image" from the menu and select the recovery image file that you downloaded earlier. 10. Wait for the recovery process to complete and the device to restart. Note: Before resetting your device, make sure to back up any important data to an external storage device or cloud storage service, as resetting your device will erase all data and applications.