Pantech GF500

Home/ Pantech/ Phones/ GF500
Pantech GF500 image - Nikonet125.com
An image of the Pantech GF500.
Table of Contents


The Pantech GF500 was a feature phone released in 2011. It featured a 2.4 inch display, a 1.3 megapixel camera, and a microSD card slot for expandable storage.

Pantech GF500 Price

The retail price of a new or used/second hand Pantech GF500 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Pantech GF500 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery life of the Pantech GF500?

The battery life of the Pantech GF500 is up to 8 hours of talk time and up to 250 hours of standby time.

How to reset or factory restore Pantech GF500 device?

Sure, here are the most common and recommended ways to reset or factory restore a Pantech GF500 device: 1. Using Hardware Reset Button: The hardware reset button is located at the back of the device, near the battery compartment. Press and hold the button for 10-15 seconds until the device restarts. Release the button and wait for the device to boot up. During the boot up process, you may be prompted to reset the device to its factory settings. Follow the on-screen instructions to complete the reset process. Note: This method will erase all data on the device, including contacts, messages, and apps. Make sure to backup all important data before attempting a hardware reset. 2. Using Recovery Mode: To reset the device using recovery mode, follow these steps: * Charge the device to at least 50% battery level. * Turn off the device and press and hold the power button until the device enters recovery mode. * Once in recovery mode, select "Wipe data/factory data" and confirm the action. * Wait for the device to erase all data and reset to factory settings. Note: This method will also erase all data on the device, so make sure to backup important data before attempting a recovery mode reset. 3. Using OEM Software: If you have the original Pantech GF500 software, you can use it to reset the device to factory settings. However, this method requires a computer with a USB cable and the OEM software installed. * Connect the device to the computer using a USB cable. * Install the OEM software on the computer. * Run the software and select "Factory Data Reset" or "Reset to Default Settings". * Follow the on-screen instructions to complete the reset process. Note: This method requires knowledge of using computer-based software and may take longer to complete than the other methods. Also, make sure to backup important data before attempting a reset using OEM software.

What type of SIM card does the Pantech GF500 use?

The Pantech GF500 uses a mini-SIM card.

What type of display does the Pantech GF500 have?

The Pantech GF500 has a 2.4-inch TFT LCD display with a resolution of 240 x 320 pixels.


Specifications

Network

TechnologyGSM
2G bandsGSM 900 / 1800 / 1900
GPRSClass 10
EDGENo

Launch

Announced2005, Q1
StatusDiscontinued

Body

Dimensions89 x 46 x 22 mm (3.50 x 1.81 x 0.87 in)
Weight83 g (2.93 oz)
SIMMini-SIM

Display

TypeTFT, 256K colors
Size
Resolution128 x 160 pixels
Second external 256K colors TFT display (128 x 160 pixels)

Memory

Card slotNo
Phonebook800 entries, Photo call
Call records10 dialed, 10 received, 10 missed calls
Internal8.4MB

Main Camera

Single1.3 MP
FeaturesLED flash
VideoYes

Selfie camera

No

Sound

LoudspeakerNo
Alert typesVibration; Polyphonic(64), MP3 ringtones
3.5mm jackNo

Comms

WLANNo
BluetoothNo
PositioningNo
Infrared portYes
RadioNo
USB

Features

Sensors
MessagingSMS, EMS, MMS
BrowserWAP 2.0/xHTML
GamesYes + downloadable
JavaYes, MIDP 2.0
Predictive text input Organizer Stopwatch Voice memo

Battery

TypeRemovable Li-Ion battery
Stand-byUp to 150 h
Talk timeUp to 3 h

Misc

Colors2 - Silver Blue and Silver Black

Other Pantech phones like the GF500