Pantech G600

Home/ Pantech/ Phones/ G600

Table of Contents

Summary

Pantech G600 Price

The retail price of a new or used/second hand Pantech G600 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Pantech G600 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

How to reset or factory restore Pantech G600 device?

To reset or factory restore a Pantech G600 device, you can use one of the following methods: Method 1: Using a PC and Pantech Drivers 1. Connect the Pantech G600 device to your PC using the USB cable. 2. Install the Pantech drivers on your PC from the Pantech website. 3. Open the Windows Control Panel and navigate to Device Manager. 4. Find Pantech G600 in the list and right-click on it, then select Properties. 5. Click on the firmware tab and select the latest firmware from the dropdown menu. 6. Click on the Install button to begin the process. 7. Once the installation is complete, restart the computer. 8. Press and hold the Volume Balance button (Located on the left side of the phone). 9. Press and hold the Power button (Right side of the phone). 10. Release the Power button and wait for a few seconds. 11. Press and hold the Volume Balance button again, then press and hold the Power button. 12. Continue holding both buttons until you see the Pantech logo on the screen. Release both buttons. 13. Use the Volume Balance button to navigate to Yes. 14. Use the Back button to return to the previous menu, then press and hold the Volume Balance button for 30 seconds. 15. Release the Power button and wait for the phone to factory reset. Method 2: Using the "Flash ROM" option 1. Open the Pantech G600's bootloader by pressing and holding the Volume Up key, the Volume Down key, and the Power button simultaneously until the bootloader logo appears. 2. Connect the phone to the PC using the USB cable. 3. Install a suitable flash file on your PC for the G600 model. You can find the flash file on the Pantech website. 4. Open the, Download and flash from the PC on the bootloader. 5. Restart the phone after flashing. 6. Press and hold the Volume Up button, the Volume Down button, and the Power button simultaneously until the bootloader logo appears. 7. Use the Volume Balance button to navigate to Yes. 8. Use the Power button to select Yes. 9. Release both buttons and wait for the phone to factory reset. Note: Resetting the device will erase all data and settings on the phone, so make sure to create backups before attempting to reset the device.