How to reset or factory restore Panasonic Eluga Tapp device?
Resetting or factory restoring a Panasonic Eluga Tapp device can help resolve issues with the device's software, settings, or performance. Here are the most common and recommended ways to reset or factory restore an Eluga Tapp device:
1. Hard Reset
Performing a hard reset can help you restart your device as if it were new. Here's how:
Turn off your device and remove the battery. Press and hold the Power button and Volume Up button simultaneously for 10 seconds. Release both buttons and insert the battery back into the device. Press and hold the Power button and Volume Up button again for 10 seconds until the device restarts in recovery mode.
In recovery mode, select the Wipe data/factory reset option and confirm. The device will then reset to its factory settings. Reinsert the battery and turn on the device.
2. Master Reset
Performing a master reset resets all the settings and user data on the device, including firmware and bootloader. It's recommended to use this method only as a last resort option, as it wipes all the data permanently. Here's how:
Turn off your device and remove the battery. Press and hold the Power button and Volume Up button simultaneously for 10 seconds until the device gets to recovery mode. Connect your device to a computer using a micro USB cable, and then check if the computer recognizes the device as a mass storage device.
If it does not recognize the device as a mass storage device, the device is resettable and you can proceed to wipe the data. To proceed, select "Mass Storage" from the main menu and choose "Flash Data." Choose "Flash ROM" from the next menu and select "Flash More." Use the computer's software to send the master reset file to the device and then unplug the device from the computer.
In recovery mode, select the Wipe data/factory reset option and confirm. The device will then reset to its factory settings. Reinsert the battery and turn on the device.
3. Soft Reset
A soft reset resets the device's settings and apps without losing any data, but it doesn't reset the firmware. Here's how:
Turn off your device and press and hold the Power button and Volume Up button simultaneously for 10 seconds until the device gets to recovery mode. Release bothbuttons and select the Wipe data/factory reset option and confirm. The device will then reset to its default settings. Reinsert the battery and turn on the device.
In summary, performing a hard reset or master reset resets the device to its factory settings and wipes all the data permanently, while a soft
