How to reset or factory restore Panasonic Eluga I3 device?
The Panasonic Eluga I3 device is equipped with several options to reset or factory restore it. Here are the most common and recommended ways to reset or factory restore a Panasonic Eluga I3 device:
1. Using the Volume Down and Power buttons:
Please insert the SIM card into the device and the charging port. If the device is switched on, turn it off. Turn it back on and press and hold the Volume down button and the Power button at the same time for 10-15 seconds until the Vendor logo appears. Once the Vendor logo appears, let go and press the Volume down button again until the Services mode appears. Then select Recovery Mode by using the Volume down button and press the Power button. Select Factory Data Reset and select Yes using the Volume buttons. Reboot the device and, after the boot-up, you can set up your device as a new device.
1. Using the Volume Down and Power buttons with Bauer’s Bootloader Utility:
Bauer's Bootloader Utility is software that allows you to flash custom firmware or perform a factory reset on your device. First, you need to connect your device to your computer using a USB cable, and then download and install Bauer's Bootloader Utility on your computer. Next, select your device from the list and select the status of your device. Then start the bootloader, make sure that your device is in bootloader mode, and select the factory data reset option. Once the reset is complete, reboot your device and, after the boot-up, you can set up your device as a new device.
1. Using the Volume Up and Power buttons with a computer and USB cable:
Before starting this method, make sure that you have backed up all your important data, as this option will delete all the data on your device. Connect your device to your computer using a USB cable, and then open the Panasonic device service center on the computer. From the list of services, select Panasonic and your device model, and then select Panasonic list. Choose your device’s firmware version and click on Download. After downloading, insert the recovered file on your device, and then flashing the firmware will start. Once the firmware is flashed, reboot your device, and, after the boot-up, you can set up your device as a new device.
