How to reset or factory restore Nokia C10 device?
There are several ways to reset or factory restore a Nokia C10 device, and the most common and recommended methods are mentioned below:
1. Using the Hardware Reset Button:
a. Press and hold the Volume Down button and Power button simultaneously for about ten seconds until the device starts flashing.
b. Release the Power button and Volume Down button and wait for the device to restart.
c. Once the device starts, the bootloader will appear with a menu to restore the firmware.
2. Using the Bootloader:
a. Turn off the device and connect it to a computer using a USB cable.
b. Install the Nokia USB driver on the computer and go to the Drivers and Devices section of your computer's Control Panel.
c. Locate the Nokia C10 device and click on it. Right-click on the device, and select "Properties."
d. Click on the "Tools" tab and select "Use this USB device for" and choose "Special software."
e. Click "OK," then click "More settings."
f. Under "Settings," select the correct connection from the dropdown list, then click "Set".
g. Click "OK" to close the settings.
h. Once done, connect the device to a computer running MIUI/MIUI Developer Options.
i. Select the device and click "Fastboot options."
j. Enable "OEM unlocking" and "USB debugging."
k. Reboot the device and press and hold the Volume Down button and Power button simultaneously until the device starts flashing.
l. Release the Power button and Volume Down button and wait for the device to restart.
3. Using Recovery Mode:
a. Turn off the device and press and hold the Volume Down button and Power button simultaneously until the device starts flashing.
b. Release the Power button and Volume Down button and wait for the device to start.
c. Once the device starts, press and hold the Volume Up and Volume Down buttons simultaneously until the Nokia logo appears.
d. Release the Volume Up and Volume Down buttons and enter the following code when prompted: *#000000000000000*.
e. Press and hold the Power button to confirm.
f. Once done, the device will start the recovery mode.
g. In recovery mode, select "Back up + Reset data to settings."
h. Follow the next steps on your device, select "Yes - Delete all user data thus resetting the phone to factory state."
Note: All of the above methods are effective, but it is essential to follow the steps carefully and backup your data before proceeding with any of them, as resetting your device will erase all data stored on the device.
