How to reset or factory restore Nokia 105 (2015) device?
The Nokia 105 (2015) is an older device, so there may be limited options for resetting or factory restoring it. However, here are some common and recommended ways to reset or factory restore a Nokia 105 (2015) device:
1. Press and hold the power key (the turns the phone off) and the volume up key for 15 seconds. This will take you to the Bootloader menu.
2. On the Bootloader menu, press and hold the power key and the volume down key to enter the recovery mode.
3. On the recovery menu, press and hold the power key to enter the bootloader menu again.
4. On the bootloader menu, connect your device to your computer using a USB cable.
5. On your computer, open the Nokia Smart Switch software and go to the "Backup and Restore" tab.
6. In the "Backup and Restore" tab, select "Choose device".
7. Select "Devices" and choose "Nokia 105 (2015)".
8. Select "Next".
9. Select "Recovery mode".
10. Choose "Yes, yes".
11. Follow the on-screen instructions to enter your device's unlock pattern or pin.
12. On the recovery menu, select "Perform factory data reset".
13. Select "Yes".
14. Select "Confirm data loss".
15. Wait for the factory data reset to complete.
Alternatively, you can try using the Nokia Care Suite software to factory reset your Nokia 105 (2015) device. Here's how:
1. Download and install the Nokia Care Suite software from the Nokia website.
2. Connect your device to your computer using a USB cable.
3. Open the Nokia Care Suite software and sign in with your Nokia ID.
4. Click on the "My devices" tab.
5. Select your Nokia 105 (2015) device from the list.
6. Click on the "Factory Data Reset" tab.
7. Follow the on-screen instructions to enter your device's unlock pattern or pin.
8. Select "Yes" when prompted to confirm the factory data reset.
9. Wait for the factory data reset to complete.
Note: Be sure to back up any important data on your device before attempting to reset it to factory settings.
