How to reset or factory restore NIU Z10 device?
The NIU Z10 is a smart electric scooter that can be reset or factory restored in the event that it malfunctions, is lost or stolen, or if the user wishes to start fresh with a clean slate. There are several ways to reset or factory restore a NIU Z10, and the most common and recommended methods include:
1. Using the NIU app: The NIU app is available for both iOS and Android devices and can be downloaded from the App Store or Google Play Store. Once installed, simply connect the scooter to your device via Bluetooth, navigate to the "Settings" tab, and select "Restore factory settings".
2. Using a USB cable: A USB cable can also be used to reset the scooter to its factory default settings. First, connect the scooter to the computer using a USB cable, and then use the NIU app to connect to the scooter. Next, select "Restore factory settings" and confirm your selection.
3. Using a manual reset: If the scooter is completely unresponsive and cannot be connected to the app or computer, a manual reset may be necessary. To perform a manual reset, locate the "Firmware Update" button on the scooter, which is typically located near the battery or display. Press and hold the button for several seconds until the scooter's lights flash rapidly, and then release the button. The scooter will automatically enter reset mode, and you can follow the on-screen instructions to reset it to its factory default settings.
Regardless of the method used, it is important to note that resetting a NIU Z10 will erase all settings, including your personalized ride mode and other customizations. Therefore, it is recommended to only perform a factory reset as a last resort and to always make a backup of your settings before doing so.
