How to reset or factory restore NEC N200 device?
The NEC N200 device can be reset or factory restored in several ways depending on the target. Here are the most common and recommended methods:
1. Using the NEC N200 Programming Tool software:
a) Connect your device to the computer using a USB cable, and confirm that it is being recognized.
b) Open the NEC N200 Programming Tool software.
c) Select the device from the list of available devices.
d) Click on the Reset button, and follow the instructions.
e) After the reset, the device will reboot and be restored to its previous state.
2. Using the target device keystrokes:
a) Turn off the device by unplugging it from the power source or pressing and holding the power button until the device shuts down.
b) Press and hold the power button, and the device's firmware LED should start blinking rapidly.
c) While the LED is blinking, press and hold the Volume Down button until the blinking stops.
d) The device's LED should start blinking again, indicating that it has entered factory mode. Press and hold the Volume Down button until the blinking stops.
e) The device's LED should stop blinking, and the screen should show the factory reset option. Select it and follow the instructions.
3. Using the NEC remote controller:
a) Turn off the device by pressing and holding the power button until the device shuts down.
b) Press and hold the power button, and the device's firmware LED should start blinking rapidly.
c) While the LED is blinking, press and hold the 1 button of the remote controller until the blinking stops.
d) The device's LED should start blinking again, indicating that it has entered factory mode. Press and hold the 1 button of the remote controller until the blinking stops.
e) The device's LED should stop blinking, and the screen should show the factory reset option. Select it and follow the instructions.
It's important to note that all of these methods will erase all of the settings, records, and preferences saved on the device, so it's recommended to backup your important data before performing a reset or factory restore. Additionally, it's recommended to only perform a reset or factory restore if you are experiencing severe issues that cannot be resolved through other means.
