NEC e1108

Home/ NEC/ Phones/ e1108

Table of Contents

Summary

NEC e1108 Price

The retail price of a new or used/second hand NEC e1108 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of NEC e1108 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery life of the NEC e1108?

The battery life of the NEC e1108 is up to 8 hours of talk time and up to 10 days of standby time.

How do I turn on the NEC e1108?

To turn on the NEC e1108, press and hold the power button for 3 seconds.

How to reset or factory restore NEC e1108 device?

NEC e1108 device is a widely used programmable logic controller (PLC) in industrial automation. Resetting or factory restoring this device is important when there are any software-related issues, crashes, or malfunctions. In this answer, I will provide you with the most common and recommended ways to reset or factory restore a NEC e1108 device. 1. Power Cycle: This is the most common and easiest way to reset an NEC e1108 device. Turn off the power supply to the device, unplug it from the power source, and then press and hold the power button for around 10-15 seconds. After that, release the power button, plug the device back into the power source, and turn on the power supply. This process will restore the device to its original factory settings and clear all program data. 2. Illumination Panel: The illumination panel is a visual indicator located on the e1108 device that shows the status of the device, such as running or stopped. To reset the device using the illumination panel, turn off the power supply to the device, press and hold the illumination panel button for around 10-15 seconds, and then release the button. Power on the device and it will reset to its factory settings. 3. Using the RC-2 Software: NEC provides RC-2 software that allows you to configure and program the e1108 device. You can use this software to reset the e1108 device to its factory settings. To do this, run the RC-2 software, select the device being reset, and then choose the "Reset" option from the menu. The software will then reset the device to its factory settings. 4. Using the Process Control Program: If you need to reset the entire system and delete all because of software-related issues, you can do so by configuring the process control program (PCP), which is responsible for running the PLC’s program. To do this, navigate to Program Selection and edit the Instruction Mode to "On." Connect to the device using Telnet or any other terminal emulator software and navigate through the terminal program until you reach the PCP. Then, you can issue the "PCP R" command to reset the device to its factory settings. These methods are recommended as they safely and effectively reset the NEC e1108 device to its factory settings. However, it is important to follow the factory manual carefully, as some devices might have specific settings or configurations that need to be taken into account before performing a reset or factory restore.