How to reset or factory restore NEC DB4100 device?
The NEC DB4100 is a ballot box voting system used for voting in various elections and primaries. To reset or factory restore a NEC DB4100 device, you can follow the steps below:
Method 1: Using a Flash Drive
1. Create a new folder on the flash drive.
2. Download the latest firmware file for the NEC DB4100 device from the manufacturer's website.
3. Rename the file to “Setting.bin”.
4. Create a new –noparm file to override the previous settings.
5. Rename the file to “Setting.noparm”.
6. Transfer the files to the flash drive.
7. Connect the flash drive to the DB4100 board using a USB cable.
8. Turn on the power and select System Settings from the main menu.
9. Press and hold the green button for 10 seconds.
10. Press and hold the yellow button for 5 seconds.
11. Release the green button, and then press the yellow button again to continue.
12. The system will boot from the flash drive. Follow the on-screen instructions to complete the reset process.
Method 2: Using a Dip Switch
1. Turn off the power to the DB4100 device.
2. Locate the dip switch on the back of the device.
3. Set the first dip switch to “1”.
4. Turn on the power to the device and wait for the system to start.
5. The system will enter Bootloader mode. Press and hold the green button for 10 seconds.
6. Release the green button, and then press and hold the yellow button for 5 seconds.
7. Release the yellow button, and then press the yellow button again to continue.
8. A message will appear on the display. Select "Yes" to proceed with the reset process.
9. Wait for the system to reset. After the reset is complete, reboot the device and verify that the settings have been restored to their default settings.
Method 3: Using a Battery Reset
1. Turn off the power to the DB4100 device.
2. Locate the battery compartment on the back of the device.
3. Remove the battery from the compartment.
4. Wait for the system to completely lose power.
5. Reconnect the battery to the device and turn on the power.
6. Wait for the system to start.
7. Follow the on-screen instructions to reconfigure the device settings to your preference.
It is important to note that you should always carefully review the instructions before attempting to reset or factory restore your NEC DB4100 device. Additionally, it is highly recommended that you obtain technical support from a qualified expert before attempting any device reset or factory restore.
