Motorola WX180

Home/ Motorola/ Phones/ WX180

Table of Contents

Summary

Motorola WX180 Price

At the time of it's release in 2010, February, the manufacturer's retail price for a new Motorola WX180 was about 20 EUR.

The retail price of a new or used/second hand Motorola WX180 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Motorola WX180 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery life of the Motorola WX180?

The Motorola WX180 has a battery life of up to 5 hours of talk time and up to 300 hours of standby time.

What type of SIM card does the Motorola WX180 use?

The Motorola WX180 uses a mini-SIM card.

What type of display does the Motorola WX180 have?

The Motorola WX180 has a 1.8 inch TFT display with a resolution of 128 x 160 pixels.

How to reset or factory restore Motorola WX180 device?

The Motorola WX180 is a basic solar-powered GPS tracker that is used to keep track of the location of vehicles, assets, and individuals. However, there may be situations where you want to reset or factory restore the device to its default settings. Here are the most common and recommended ways to reset or factory restore a Motorola WX180 device: 1. Using the device itself: The easiest way to reset a Motorola WX180 device is to use the device itself. Press and hold the "POWER" button for ten seconds until the device starts flashing. This will put the device into reset mode. Once the device is flashing, press and hold the "STATUS" button until it stops. The device will now be reset to its default settings. 2. Using the key code: You can also use a key code to reset the Motorola WX180 device. The key code for this device is "9999". To use the key code, first, Press and hold the "POWER" button for a few seconds until the device starts flashing. Next, release the "POWER" button and press the "KEY" button (usually located at the top of the device) until you hear a beep. Now, press and hold the "POWER" button again for a few seconds until the device flashes. Once it flashes, press and hold the "KEY" button for a few seconds until you hear a beep. Finally, press the "KEY" button four times, each time waiting until you hear a beep before pressing the button. The device will now be reset to its default settings. 3. Using the Motorola WX180 web interface: If you have access to a computer, you can also reset the Motorola WX180 device by logging into its web interface. To do this, you will need a network connection and the device's serial number. Visit the Motorola WX180 web interface and log in using your serial number. Once you are logged in, go to the "Configuration" tab and select "Reset". Click the "Yes" button to confirm the reset. The device will now be reset to its default settings. It's important to note that resetting the Motorola WX180 device will erase all data, including any location data that was previously stored on the device. Therefore, be sure to backup any important data before resetting the device.