How to reset or factory restore Motorola ROKR E6 device?
There are several ways to reset or factory restore a Motorola ROKR E6 device, but the most common and recommended methods are:
Method 1: Using the hardware keys
To reset the Motorola ROKR E6 device using the hardware keys, follow the steps below:
1. Turn off the device by pressing and holding the power button until the phone shuts down.
2. Press and hold the 1 and 0 keys on the keypad until the Motorola logo appears on the screen.
3. Release the 0 key and press and hold the 8 key until the Motorola logo appears again.
4. Press and hold the 5 key until the Motorola logo appears again.
5. Release all the keys and wait for the device toboot up.
6. When the device boots up, you will be presented with the option to reset the device to its factory settings. Select the option and follow the prompts to complete the reset process.
Method 2: Using the Motorola PC Suite
To reset the Motorola ROKR E6 device using the Motorola PC Suite, follow the steps below:
1. Connect the device to your computer using the USB cable.
2. Launch the Motorola PC Suite on your computer.
3. Click on the "Tools" tab and select "Backup/Restore."
4. Select "Restore Phone" and follow the prompts to complete the restore process.
5. The device will be reset to its factory settings, and you will be prompted to set up the device as if it were new.
Method 3: Using the Motorola Service Center
To reset the Motorola ROKR E6 device using the Motorola Service Center, follow the steps below:
1. Contact your service provider and request a reset code for your device.
2. Enter the reset code when prompted by the device.
3. The device will be reset to its factory settings, and you will be prompted to set up the device as if it were new.
Method 4: Using the Motorola Remote Wipe feature
To remotely wipe the Motorola ROKR E6 device using the Motorola Remote Wipe feature, follow the steps below:
1. Log in to Motorola Live by visiting the Motorola Live website and entering your Motorola Live account information.
2. Click on the "Remote Wipe" tab and select " devices."
3. Select the device you want to remotely wipe.
4. Follow the prompts to complete the remote wipe process.
5. The device will be reset to its factory settings, and you will need a new password or PIN to access the device.
It is important to note that Factory resetting the device will erase all data and settings, including contacts, messages, music, and applications. Before resetting the device, make sure to backup any important data and settings. Also, if you have a personalized phone number, you will not be able to keep it after resetting the device.
