How to reset or factory restore Motorola L800t device?
Sure, here are the most common and recommended ways to reset or factory restore a Motorola L800t device:
Method 1: Software Update via MicroUSB Cable
1. Connect the Motorola L800t device to your computer using a microUSB cable.
2. Open the Motorola Connect app on your computer and connect to your device.
3. In the Motorola Connect app, go to the "Support" tab and select "Software Updates".
4. Follow the prompts to download and install the latest software update for your device. If prompted to choose a software update version, select the one that starts with "C1".
5. Once the software update is complete, the device will reboot automatically. You can check the software version by going to Settings > About phone.
Method 2: Hard Reset via Physical Buttons
1. Make sure the battery is charged to at least 50%.
2. Turn off the device by pressing and holding the Power button for about 10 seconds.
3. Press and hold the Volume Up button and Power button simultaneously for about 30 seconds.
4. Release both buttons and the device will vibrate once or twice.
5. Press and hold the Volume Down button and Power button simultaneously for about 10 seconds, until the LG logo appears on the screen.
6. Release both buttons and the device will vibrate once or twice.
7. Press and hold the Volume Down button and Power button simultaneously for about 30 seconds, until the display turns off.
8. Release both buttons and the device will vibrate once or twice.
9. Press and hold the Volume Up button and Power button simultaneously once again until the LG logo appears on the screen.
10. Release both buttons and the device will vibrate once or twice.
11. Press and hold the Volume Up button and Power button simultaneously for about 30 seconds, until the device restarts.
Method 3: Factory Reset via OEM (Flash) Tool
1. Download the Moto L800t OEM Flash Tool from the Motorola support website.
2. Connect the Motorola L800t device to your computer using a microUSB cable.
3. Run the OEM Flash Tool as administrator.
4. Select "Spare Parts" from the list on the left side of the screen.
5. Select "BSP Binary" from the list on the right side of the screen.
6. Click on the "Browse" button and navigate to the directory where you downloaded the Moto L800t OEM Flash Tool.
7. Select the "c25f5a1c207031c2.bin" file and click "Open".
8. Click "OK" to select the BSP Binary file.
9. Click "Yes" to confirm the flash operation.
10. Wait for the devices to reboot.
These are the most common and recommended ways to reset or factory restore a Motorola L800t device.
