How to reset or factory restore Motorola G Pure device?
Motorola G Pure is a mid-range smartphone that runs on Android 10 operating system. If you need to reset or factory restore your Motorola G Pure device, you can follow the steps below:
Method 1: Using Recovery Mode
1. Backup all your data to your computer or an external storage device, if any.
2. Use a USB cable to connect your phone to your computer.
3. Download and install the Android Debug Bridge (ADB and Fastboot) software from the Motorola website.
4. Open a command prompt on your computer and navigate to the directory where ADB is installed.
5. Check if your device is connected to your computer by typing "adb devices" in the command prompt.
6. Reboot your phone into recovery mode by pressing and holding the Power button + Volume up button until the Motorola logo appears.
7. Select "Use volume keys to navigate" and use the Volume up and Volume down buttons to navigate.
8. Select "Reboot system" and confirm your choice.
9. Wait for the phone to reboot and then connect to your computer.
10. Open a new command prompt window and type "fastboot flash recovery recovery.img".
11. Reboot your phone into recovery mode again by pressing and holding the Power button + Volume up button until the Motorola logo appears.
12. Once you are in recovery mode, select "Wipe data/factory data" and confirm your choice.
13. You will be prompted to select "Yes: erase all user data". This includes all app data, settings, and other user files. Confirm your choice.
14. Wait for the phone to wipe all data and restore to factory settings.
Method 2: Using the Factory Reset Protection Lock Screen
If you have enabled the Factory Reset Protection (FRP) lock screen, you will need to enter the PIN, pattern or other personal information to reset your device. Here's how to do it:
1. Open the lock screen by pressing and holding the Power button + Volume up button until the Motorola logo appears.
2. Select "Wipe data/factory data" and confirm your choice.
3. You will be prompted to enter your PIN, pattern or other personal information associated with the FRP lock screen.
4. Once you have entered the correct information, the device will reset to factory settings and prompt you to set up your device as new.
Note: Exercising a factory reset will erase all app data, settings, and other user files, so make sure to back up all important data before performing a reset. Also, if you have enabled FRP, make sure that you have the correct security information on hand before resetting your device.
