How to reset or factory restore Motorola Fire device?
Resetting or factory restoring a Motorola Fire device is a process that can give the device a new lease of life by wiping out all data, applications, and customizations that were previously installed. It is important to use the most recommended and common methods to avoid any potential damage to the device. Here are the most common and recommended ways to reset Motorola Fire:
1. Reset through Settings Menu:
a. Turn off the Motorola Fire device.
b. Unplug the device from the charger, computer, or any other power source.
c. Press and hold the Power button down for about 10 seconds until the Motorola logo appears on the screen.
d. Android version 8 and later: While holding down the Power button, press and hold the Volume down button as well for about 10 seconds until the Motorola logo appears.
e. Release both buttons, and the device will boot into recovery mode.
f. Use the Volume up and down buttons to navigate through the menu, and press the Power button to select an option.
g. Select "Wipe data/factory reset" and confirm by selecting "Yes - delete all user data."
h. The device will now reset, and the screen will prompt you to set up the device as if it was new.
2. Factory Reset using a computer:
a. Download the latest version of Motorola Fire's USB driver from Motorola's website.
b. Connect the Motorola Fire to the computer using a USB cable.
c. Open a command prompt on your computer.
d. Navigate to the directory where you downloaded the motorola-specific-usb-setup.exe file, and run it.
e. Follow the instructions on the screen to install the drivers.
f. Once the drivers are installed, disconnect the device from the computer.
g. Turn off the Motorola Fire device and unplug it from the charger, computer, or any other power source.
h. Press and hold the Power button down for about 10 seconds until the Motorola logo appears on the screen.
i. Android version 8 and later: While holding down the Power button, press and hold the Volume down button as well for about 10 seconds until the Motorola logo appears.
j. Connect the device to the computer using a USB cable.
k. Press and hold the Power button down for about 10 seconds until the Motorola logo appears.
l. Release the Power button, and the device will boot into recovery mode.
m. Select "Wipe data/factory reset" and confirm by selecting "Yes - delete all user data."
n. The device will now reset, and the screen will prompt you to set up the device as if it was new.
3. Reset using Samsung Smart Switch:
a. Download the latest version of Samsung Smart Switch from Samsung's website.
b. Connect the Motorola Fire to the computer using a USB cable.
c. Open Samsung Smart Switch on your computer.
d. Select "Restore from back up."
e. Sign into your Samsung account, and select "Back up content from your device."
f. Select "Restore content to your device."
g. Choose the device backup file that you want to use to restore your data.
h. Follow the instructions on the screen to complete the restore process.
i. Once the restore process is complete, the device will reset, and the screen will prompt you to set up the device as if it was new.
In conclusion, resetting or factory restoring a Motorola Fire device is a process that can give the device a new lease of life by wiping out all data, applications, and customizations that were previously installed. The above-mentioned methods are the most common and recommended ways to reset Motorola Fire devices. It is recommended to use Samsung Smart Switch or a computer to reset the device, as it is a safer process than using factory reset through the settings menu. It is important to note that resetting the device will erase all data, applications, and customizations, so it is important to back up important data before resetting the device.
