How to reset or factory restore Modu Speedy jacket device?
Modu Speedy jacket devices can be reset or factory restored to their default settings if they are malfunctioning, have been corrupted, or have been customized beyond recognition. The following are the most common and recommended ways to reset or factory restore a Modu Speedy jacket device:
Method 1: Reset using wired connection
1. Connect your Modu Speedy jacket device to your computer using the provided USB cable. Press and hold the power button on the device until the power LED starts flashing rapidly.
2. Disconnect the device from the computer and press and hold the power button for 10 seconds. The power LED should stop flashing.
3. Press and hold the power button for an additional 30 seconds until the power LED starts flashing again.
4. Release the power button and wait for the device to restart. You should see the device resetting to its default settings.
Method 2: Reset using wireless connection
1. Ensure that the Modu Speedy jacket device is within range of a Bluetooth 5 radio frequency.
2. On your computer, go to the Modu Speedy jacket device's settings page and press the "Reset" button. This may require a password or authentication.
3. Wait for the device to reset to its default settings. You will see a notification that the device has been reset.
Method 3: Factory restore
1. Ensure that the Modu Speedy jacket device is currently on v1.0 firmware.
2. Download and install the latest firmware from the Modu Speedy jacket website. This may require a password or authentication.
3. Connect your Modu Speedy jacket device to your computer using the provided USB cable.
4. Press and hold the power button on the device until the power LED starts flashing rapidly.
5. Disconnect the device from the computer and press and hold the power button for 10 seconds. The power LED should stop flashing.
6. Press and hold the power button for an additional 30 seconds until the power LED starts flashing again.
7. Release the power button and wait for the device to restart. You should see the device resetting to its default settings.
8. Select "Update Firmware" on the device's settings page and follow the on-screen instructions to flash the new firmware onto the device.
It's important to note that a factory restore will erase all data and settings on the device, so only perform this if you are sure that you won't need any of the existing data. Also, always backup any important data before performing a reset or factory restore.
