How to reset or factory restore Mitsubishi Trium Cosmo device?
Resetting or factory restoring a device is an effective way to troubleshoot problems or restore the device to its original state. In this case, we will be discussing the most common and recommended methods to reset or factory restore a Mitsubishi Trium Cosmo device.
Method 1: Using the Recovery Mode
1. Turn off the device and press and hold the power button.
2. Release the power button, then press and hold the volume up button, volume down button and the power button simultaneously.
3. Release all buttons after holding them for about 10 seconds.
4. Use the volume up button to navigate to the "Recovery Mode" option and press the power button to select it.
5. Use the volume up and down buttons to navigate to the "Yes - restore to factory data" option and press the power button to select it.
6. Wait for the device to reboot and complete the reset process.
Method 2: Using the Stock Recovery
1. Download the stock recovery file for your Mitsubishi Trium Cosmo device from a trustworthy website.
2. Connect the device to your computer using a USB cable.
3. Open a command prompt window on your computer and navigate to the folder where the stock recovery file is located.
4. Type the following command and press enter: "fastboot flash recovery recovery.img"
5. Disconnect the device from your computer and press and hold the power button and the volume up button simultaneously.
6. Release the power button, then press the volume up button to enter the recovery mode.
7. Use the volume up and down buttons to navigate to the "Yes - restore to factory data" option and press the power button to select it.
8. Wait for the device to reboot and complete the reset process.
Method 3: Using the Rescue Mode
1. Connect the device to the internet using a Wi-Fi connection or mobile data.
2. Open the Mitsubishi Service Assistant app on your mobile device and sign in with your account.
3. Select your device model and enter your device's serial number.
4. Follow the on-screen instructions to enter your device's current firmware version.
5. Follow the on-screen instructions to select "Rescue" and your preferred Ashley Firmware.
6. Follow the on-screen instructions to enter the PIN code.
7. Wait for the device to reboot and complete the reset process.
Note: Resetting or factory restoring your device will erase all data on the device. Be sure to backup all important data before proceeding with the reset process. It is also recommended to check with your device's warranty policy to ensure that resetting or factory restoring your device will not void your warranty.
