How to reset or factory restore Micromax W900 device?
Micromax W900 is an Android-powered device that runs on Android operating system (OS). There are several ways to reset or factory restore this device, depending on the specific situation. Here are the most common and recommended ways to reset or factory restore a Micromax W900 device:
Method 1: Hard Reset (Factory Data Reset) through Recovery Mode:
1. Turn off the device.
2. Connect your Micromax W900 phone to your computer and make sure it is recognized by your computer.
3. Go to the Micromax website and download the firmware update for your device.
4. Open the recovery menu by pressing and holding the Volume Down and Power buttons simultaneously until the recovery menu appears on the screen.
5. Password recovery to get access to the recovery menu.
6. Select 'data/factory data reset' and wait for the process to complete.
7. Reboot your device to finish the process.
Method 2: Hard Reset (Factory Data Reset) through stock ROM:
1. Download the Stock recovery ROM or your exported data from backup software from the internet and save it on your computer.
2. Turn off your device.
3. Connect your Micromax W900 device to your computer using USB cable.
4. Reboot the device while holding both Volume-down and Power keys until the stock recovery menu appears on the device screen.
5. Select "Backup and restore" and then select "Revive your device" located on top of the screen in the backup and restore menu.
6. Select the stock ROM recovery image that you downloaded beforehand and click on the orange bottom of the revive button.
7. Wait for the process to complete, this process may take some time, so don't panic.
8. Anyway, don't disconnect the cable out from the phone and wait for the phone to reboot.
Method 3: Hard reset (Factory Data Reset) through Bootloader Mode:
1. Download the stock recovery ROM or your exported data from backup software from the internet and save it on your computer.
2. Turn off your device.
3. Connect your Micromax W900 device to your computer using USB cable.
4. Using the MSFT DEBUGGER, you need to make sure that your device is recognized by the computer and is compatible with your computer and the recovery image.
5. Go to the Micromax website and find the recovery image for your device by running the command "adb recovery" in the command prompt
6. Reboot your device while holding both Volume-down and Power buttons until the stock recovery menu appears on the device screen.
7. Select "Bootloader" and then "Recovery"
8. Select "Backup and restore" and then select "Revive your device" located on top of the screen in the backup and restore menu
9. Select the stock ROM recovery image that you downloaded beforehand and click on the orange bottom of the revive button
10. Wait for the process to complete, this process may take some time, so don't panic.
Note: If you want to update an existing ROM, then, in this process, replace the ROM with the new ROM from the assign section. It is advisable to take a backup of your data before trying any resetting process. Make sure to use the correct firmware version for your device and be aware of any potential risks and consequences before performing a factory data reset.
What are the features of the Micromax W900?
The Micromax W900 features a 3.5-inch display, a 5MP rear camera, a 0.3MP front camera, and a 2000mAh battery.
