How to reset or factory restore Micromax Infinity N12 device?
Sure, here are the most common and recommended ways to reset or factory restore a Micromax Infinity N12 device:
Method 1: Using the Hardware Keys
1. Power off your Micromax Infinity N12 device completely.
2. Press and hold the Volume Down button + Power button together for at least 10 seconds until the device enters Bootloader mode. You may need to release and re-press the buttons multiple times until you see the Micromax logo.
3. Once you are in Bootloader mode, connect your device to your computer using a USB cable.
4. Open a command prompt or terminal window on your computer and enter the following command to check if your device is detected: `adb devices`. You should see your device's serial number listed.
5. To reset your device to its factory settings, enter the following command in the command prompt or terminal window: `adb reboot recovery`. This will reboot your device into recovery mode.
6. In recovery mode, select "Wipe data/factory reset" and confirm the action. Your device will then begin the reset process, which may take some time.
Method 2: Using the Recovery Menu
1. Power off your Micromax Infinity N12 device completely.
2. Press and hold the Power button until your device enters Bootloader mode. You may need to release and re-press the button multiple times until you see the Micromax logo.
3. Once you are in Bootloader mode, connect your device to your computer using a USB cable.
4. Open a command prompt or terminal window on your computer and enter the following command to check if your device is detected: `adb devices`. You should see your device's serial number listed.
5. To reset your device to its factory settings, boot your device into recovery mode. To do this, enter the following command in the command prompt or terminal window: `adb reboot recovery`.
6. In recovery mode, select "Wipe data/factory reset" and confirm the action. Your device will then begin the reset process, which may take some time.
Method 3: Using Android Developers Toolkit (ADT)
1. Download and install the Android Developers Toolkit (ADT) on your computer.
2. Connect your Micromax Infinity N12 device to your computer using a USB cable.
3. Open the ADT toolbox and select "Developer Tools" > "SDK Manager".
4. Select "Android" from the list of options and make sure you have the latest version of the Android SDK installed.
5. Open a command prompt or terminal window on your computer and navigate to the ADT toolbox directory.
6. Enter the following command to check if your device is detected: `adb devices`. You should see your device's serial number listed.
7. To reset your device to its factory settings, enter the following command in the command prompt or terminal window: `adb shell am force-stop com.android.runtime.system`.
8. Then, enter the following command to reboot the device in recovery mode: `adb shell su -c 'reboot recovery'`.
9. In recovery mode, select "Wipe data/factory reset" and confirm the action. Your device will then begin the reset process, which may take some time.
Note: Resetting your device to its factory settings will erase all data and settings on the device. It is important to back up any important data or information before resetting your device.
