How to reset or factory restore Micromax A90s device?
Sure, here are the most common and recommended ways to reset or factory restore a Micromax A90s device:
Method 1: Soft Reset
-----------------
To perform a soft reset on your Micromax A90s device, follow these steps:
1. Press and hold the power button and the volume down button together for 15-20 seconds or until the device restarts.
2. Release the power button and the volume down button, and wait for the device to start up.
This will restart your device and clear all temporary data, but it will not erase user data stored on the device's storage.
Method 2: Hard Reset (Bootloader)
------------------------------
Hard resetting your device means resetting it back to its factory settings by accessing the bootloader. Here are the steps to perform a hard reset on your Micromax A90s device:
1. Turn off your device.
2. Connect your device to your computer using a USB cable.
3. Open a command prompt on your computer.
4. Navigate to the directory where the ADB tool is installed.
5. Enter "adb devices" to make sure your device is recognized by your computer.
6. Enter "adb reboot bootloader" to boot your device into the bootloader.
7. After your device boots into the bootloader, use the volume keys to navigate to the "Wipe data/factory reset" option.
8. Press the power button to select the option.
9. Your device will now start the factory reset process and will erase all data on the device, including user data.
This is the most effective way to reset a device and restore it to its factory settings, but it also involves a bit more technical knowledge. Be careful when using a hard reset, as it will erase all data on the device and there is no way to recover it once complete.
Method 3: Recovery Rom
--------------------
Installing a custom recovery on your device and using it to perform a factory reset can also be an effective way to reset the device. Here are the steps to perform a factory reset using a recovery on your Micromax A90s device:
1. Download and install a custom recovery on your device.
2. Turn off your device.
3. Press and hold the power button and the volume up button together until the device boots into the recovery menu.
4. From the recovery menu, navigate to the "Wipe data/factory reset" option and select it.
5. Wait for the device to complete the factory reset process.
6. After the factory reset is complete, exit the recovery menu and reboot the device.
This method allows you to customize the recovery process and choose whether to wipe user data or keep it. It also requires a bit more technical knowledge than some of the other methods, but it offers more control over the process.
