How to reset or factory restore Micromax A108 Canvas L device?
Micromax A108 Canvas L is an Android device that came with the Android 4.4 KitKat operating system. If you are facing some software issues or want to reset your device to its original state, you can perform a factory data reset, also known as a "hard reset." Here are the most common and recommended ways to reset or factory restore a Micromax A108 Canvas L device:
Method 1: Using the Reboot menu
1. Turn off your phone.
2. Hold down the Volume Down button and the Power button at the same time for 5 to 7 seconds.
3. Release both buttons.
4. Wait for the phone to restart.
5. If the phone doesn't start, repeat the process after 20 or 30 seconds.
6. Once the phone is restarting, press and hold the Volume Up button until you reach the Bootloader menu.
7. Use the Volume buttons to navigate to the Recovery menu.
8. Press the Volume Down button to highlight the "Wipe data/factory reset" option.
9. Press the Volume Up button to select the option.
10. Press the Volume Down button to create an auto-save file.
11. Press the Volume Up button to confirm the request to erase all user data.
12. Wait for the device to reset itself.
13. Once the reset is complete, reboot your device by pressing and holding the Power button until the phone restarts.
Method 2: Using the recovery menu
1. Turn off your phone.
2. Hold down the Volume Down button and the Power button at the same time for 5 to 7 seconds.
3. Release both buttons.
4. Wait for the phone to restart.
5. If the phone doesn't start, repeat the process after 20 or 30 seconds.
6. Once the phone is restarting, press and hold the Volume Up button until you reach the Bootloader menu.
7. Use the Volume buttons to navigate to the Recovery menu.
8. Press the Volume Down button to highlight the "Wipe data/factory reset" option.
9. Press the Volume Up button to select the option.
10. Press the Volume Down button to create an auto-save file.
11. Press the Volume Up button to confirm the request to erase all user data.
12. Wait for the device to reset itself.
13. Once the reset is complete, reboot your device by pressing and holding the Power button until the phone restarts.
Method 3: Using the Samsung Kies software
1. Open the Samsung Kies software on your computer.
2. Connect your device to your computer using a USB cable.
3. Select your device on the computer.
4. Click on the "Backup All" button.
5. Follow the prompts to create a backup of your device.
6. Once the backup is complete, disconnect your device from the computer.
7. Turn off your device.
8. Hold down the Volume Down button and the Power button at the same time for 5 to 7 seconds.
9. Release both buttons.
10. Wait for the phone to restart.
11. If the phone doesn't start, repeat the process after 20 or 30 seconds.
12. Once the phone is restarting, press and hold the Volume Up button until you reach the Bootloader menu.
13. Use the Volume buttons to navigate to the Recovery menu.
14. Press the Volume Down button to highlight the "Wipe data/factory reset" option.
15. Press the Volume Up button to select the option.
16. Press the Volume Down button to create an auto-save file.
17. Press the Volume Up button to confirm the request to erase all user data.
18. Wait for the device to reset itself.
19. Once the reset is complete, connect your device to the computer using a USB cable.
20. Launch the Samsung Kies software on your computer.
21. Select your device on the computer.
22. Click on the "Restore All" button.
23. Follow the prompts to restore your device from the backup.
