How to reset or factory restore Micromax A089 Bolt device?
When it comes to troubleshooting Micromax A089 Bolt, one of the most useful amateur actions can be a factory reset or rooting. A factory reset can help you if for example, your device freezes, crashes, or has any other software-related issues. Rooting the device can give you more control over your device's software and hardware, but keep in mind that if you're not familiar with it, rooting can be a risky move that carries the potential to permanently damage your device. This guide will explain how to perform a soft reset and a hard reset, along with factory restore and rooting. Performing a soft reset or hard reset is much simpler than booting into recovery mode and then choosing to perform a factory reset.
Soft Reset (Button Press Technique):
1. Turn off the device by pressing and holding the power button until the device shuts down.
2. Press and hold the Power button, the Volume Up button, and the Volume Down button simultaneously.
3. Release all buttons after a few seconds.
4. The phone will enter into recovery mode.
5. In the recovery menu, select "Factory Data Reset".
6. Confirm your decision by selecting "Yes – Delete all user data".
7. Wait for the phone to reset itself. After a few minutes, the phone will restart, and all data will be lost.
Hard Reset (Charger Technique):
1. Connect the device to a charger using a USB cable.
2. Turn off the device by pressing and holding the power button until the device shuts down.
3. The phone will enter into recovery mode.
4. In the recovery menu, select "Factory Data Reset".
5. Confirm your decision by selecting "Yes – Delete all user data".
6. Wait for the phone to reset itself. After a few minutes, the phone will restart, and all data will be lost.
Factory Reset:
If the above steps don't work or not recommend for some reason, you can try a factory reset through the Recovery Menu.
1. Turn off the device by pressing and holding the power button until the device shuts down.
2. Press and hold the Power button, the Volume Up button, and the Volume Down button simultaneously.
3. Release all buttons after a few seconds.
4. The phone will enter into recovery mode.
5. In the recovery menu, select "Factory Data Reset".
6. Confirm your decision by selecting "Yes – Delete all user data".
7. Wait for the phone to reset itself. After a few minutes, the phone will restart, and all data will be lost.
Rooting:
Rooting your Micromax A089 Bolt can be complex and can cause harm to your device if done incorrectly. It may also void your device's warranty.
Instructions:
1. Before you start the rooting process, make sure your device has a custom recovery installed. How to install a custom recovery on Micromax A089 Bolt?
2. Once you have a custom recovery installed, download SuperSU from here.
3. Create a recovery backup of your current ROM before flashing.
4. Follow these steps to flash SuperSU onto your device:
* Copy the SuperSU .zip file into the root folder of your SD card.
* Reboot into recovery mode.
* In the recovery menu, select "Install".
* Navigate through the menu and select "SuperSU.zip".
* Swipe to confirm the installation.
5. Reboot your device into system. Your device should now have SuperSU root access.
In conclusion, these solutions can help
