Maxwest Vice

Home/ Maxwest/ Phones/ Vice

Table of Contents

Summary

Maxwest Vice Price

The retail price of a new or used/second hand Maxwest Vice varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Maxwest Vice across different regions, markets and countries.

Frequently Asked Questions(FAQs)

How to reset or factory restore Maxwest Vice device?

Sure, here are the steps to reset or factory restore a Maxwell Vice device: Method 1: Using the Stock Recovery 1. Backup all your important data to your computer. 2. Hold down the Volume button and the Power button at the same time until the device enters recovery mode. You may need to release and repress the buttons several times to successfully enter recovery mode. 3. Connect the device to your computer using a USB cable. 4. Open the recovery interface on your computer. 5. Select "Factory Data Reset" and confirm your selection. 6. Wait for the device to reset and reboot. 7. Once the device reboots, connect it to your computer again and restore your backup data. Method 2: Using the Hardware Reset Method 1. Disconnect all the peripherals from the device, including the charger. 2. Remove the battery from the device. 3. Press and hold the Volume + Power buttons together for around 10 seconds until the device enters recovery mode. 4. Release the buttons and then press and hold the Volume Down button while keeping the Power button pressed. Keep holding the Volume Down button until the recovery menu appears. 5. Select "Wipe data/factory reset" and confirm your selection. 6. Wait for the device to reset and reboot. 7. Once the device reboots, insert the battery again and restore your data. Note: Resetting your device to its factory settings will erase all your data and settings. Make sure to backup all your important data before attempting to reset the device. It is also recommended to use the software-based method to reset the device as it is less risky and less likely to damage the device's internal components.