Maxwest Nitro 5

Home/ Maxwest/ Phones/ Nitro 5

Table of Contents

Summary

Maxwest Nitro 5 Price

The retail price of a new or used/second hand Maxwest Nitro 5 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Maxwest Nitro 5 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of Maxwest Nitro 5?

The battery capacity of Maxwest Nitro 5 is 2500 mAh

How to reset or factory restore Maxwest Nitro 5 device?

Sure, here are the most common and recommended ways to reset or factory restore a Maxwest Nitro 5 device: Method 1: Using Hardware Reset Button 1. Turn off the device. 2. Press and hold the Volume Up and Power buttons simultaneously for 10-12 seconds until the device restarts. 3. Release both buttons and wait for the device to turn on again. The device should now be in Factory Reset mode. 4. Use the Volume Up button to navigate through the menu and select "erase all user data/factory data". 5. Press and hold the Power button to confirm the selection. 6. Wait for the device to reset itself, which may take several minutes. 7. Once the device has reset, turn it on and follow the prompts to set it up as a new device. Method 2: Using Computer and USB Cable 1. Connect the Maxwest Nitro 5 device to a computer using a USB cable. 2. Open the Maxwest Nitro 5 USB driver on the computer. 3. Open the "Recovery home" application on the device (if available). 4. Select the "Recovery" option from the menu. 5. Select "Wipe data/factory reset". 6. Confirm the selection. 7. Wait for the device to reset itself. 8. Disconnect the device from the computer and follow the prompts to set it up as a new device on the phone. Method 3: Using Stock Firmware 1. Download the stock firmware for your Maxwest Nitro 5 device from a trusted source. 2. Connect the device to a computer using a USB cable. 3. Place the device into recovery mode (using the Volume Up and Power button method described above). 4. Select the "Install from SD card" option from the recovery menu. 5. Browse to the location where the firmware file is stored on your computer, select it, and tap "OK". 6. Wait for the firmware to install on the device. 7. Once the firmware has installed, select "Reboot system" from the recovery menu. 8. Follow the prompts to set up the device as a new device on the phone. Note: Before resetting your Maxwest Nitro 5 device, it is important to ensure that you have backed up any important data. Additionally, be aware that resetting your device will erase all user data, so reset at your own risk.