Maxon MX-6869

Home/ Maxon/ Phones/ MX-6869

Table of Contents

Summary

Maxon MX-6869 Price

The retail price of a new or used/second hand Maxon MX-6869 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Maxon MX-6869 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery life of the Maxon MX-6869?

The battery life of the Maxon MX-6869 is up to 8 hours of talk time.

How to reset or factory restore Maxon MX-6869 device?

When you need to reset or factory restore a Maxon MX-6869 device, there are three methods that you can try. The recommended method will depend on your device's specific situation and condition. Method 1: Use the built-in reset function To reset a Maxon MX-6869 device using the built-in reset function, follow these steps: 1. With your device powered off, press and hold the reset button (located at the front of the unit) for at least 10 seconds. 2. Release the reset button. 3. Power on the device again. The device should now be reset to its default settings. Method 2: Use a soldering iron to clear the EEPROM If the built-in reset function doesn't work, you can try using a soldering iron to clear the EEPROM. This method should only be attempted by someone with experience soldering. 1. Turn off the device. 2. Disconnect the device from the power source and any other connections, including the MIDI port, USB port, and audio output. 3. Use a soldering iron to solder the EEPROM (located on the back of the device) to the ground pin. Make sure to not touch any other parts of the EEPROM with the soldering iron. 4. Turn on the device. The device should now be reset to its default settings. Note that this method may cause more damage to your device if done incorrectly, so it's important to follow the instructions carefully. Method 3: Use a USB DFU programmer to restore the firmware If both the built-in reset function and soldering the EEPROM fails, you may need to use a USB DFU programmer to restore the firmware of your device. This method requires a computer with the appropriate software and a USB cable. 1. Connect the Maxon MX-6869 to the computer using the USB cable. Make sure to turn off the power to the device by turning off the On/Off switch on the front of the device. 2. Open a command prompt and navigate to the directory where the USB DFU programmer software is installed. 3. Type the command "dfu-zero-audibles.exe -smx 1 C:" followed by the path to where the firmware file is stored. This assumes that the firmware file is named "audibles.h6x.firmware" and is stored in the "C:" drive. 4. Press Enter to execute the command. 5. Wait for the program to complete. It may take several minutes. 6. Disconnect the device from the computer and turn it back on. The device should now be restored to its default settings and firmware.