How to reset or factory restore LG GD550 Pure device?
Here are the most common and recommended ways to reset or factory restore a LG GD550 Pure device:
Method 1: Hard Reset
To perform a hard reset on the LG GD550 Pure, follow these steps:
1. Turn off the device by pressing and holding the power button until it turns off.
2. Press the volume up button and the home button simultaneously until it turns on in recovery mode.
3. Press the volume up button until the menu appears and select the "Wipe data/factory reset" option.
4. Press the volume down button until the "Yes--delete all user data" option appears and select it.
5. Wait for the device to wipe all data and settings and return to the factory settings menu.
6. Press the volume up and home button at the same time to select the "Reboot system now" option.
Method 2: Recovery Mode Reset
To perform a reset in recovery mode on the LG GD550 Pure, follow these steps:
1. Turn off the device by pressing and holding the power button until it turns off.
2. Press the volume up button and the home button simultaneously until it turns on in recovery mode.
3. Select the "Wipe data/factory reset" option from the menu.
4. Select "Yes--delete all user data" to confirm the reset.
5. Wait for the device to wipe all data and settings and return to the factory settings menu.
6. Press the volume up and home button at the same time to select the "Reboot system now" option.
Method 3: Software Update
To perform a software update reset on the LG GD550 Pure, follow these steps:
1. In this method, the device will be reset to the factory config and the software will be updated. The device will be removed from all 5G networks to 4G. It's the last resort.
2. Turn off your device by holding down the power button for 10 seconds.
3. Press and hold the volume up button and the home button at the same time for 10 seconds until the device turns on.
4. Select the "Recovery mode" option (usually, you have to press the volume up button for several times).
5. Select the "Factory data reset" option.
6. Select the "Yes -- delete all user data" option.
7. Wait for the device to wipe all data and settings.
8. After the device has finished resetting to the factories settings, enter EEOR (EEOR) in the lower left corner of the screen.
9. Select the "Yes -- Factory Data Reset" option.
10. Select the "Yes -- delete all user data" option.
11. Select "Wipe data/factory reset" option, again "Yes -- delete all user data".
12. wait for the device to finish resetting.
13. Select the "Reboot System Now" option and wait for the device to restart.
14. After restarting, go to the phone settings you can connect to 5G networks.
Note: Before performing any of these methods, make sure to back up any important data if possible.
