LG GB190

Home/ LG/ Phones/ GB190

Table of Contents

Summary

LG GB190 Price

At the time of it's release in 2009, October, the manufacturer's retail price for a new LG GB190 was about 60 EUR.

The retail price of a new or used/second hand LG GB190 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of LG GB190 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

How to reset or factory restore LG GB190 device?

The LG GB190 is a smartphone that has several options for resetting or factory restoring the device. Below are the most common and recommended ways to reset or factory restore the device: 1. Using the physical buttons: This method requires the use of the power, home, and volume down buttons to access the recovery menu. Press and hold the power and home buttons together, then release the power button and press and hold the home and volume down buttons together. Wait for the LG logo to appear, then select "Wipe data/factory reset" and confirm the action. This will erase all user data and settings on the device. 2. Using the ultrasonic resetter: This is a hardware tool that allows you to reset the device without using the physical buttons. Connect the resetter to the device and then press the reset button on the resetter. The device will restart in recovery mode, and you can then select "Wipe data/factory reset" to erase all user data and settings. 3. Using the computer: You can alsoreset the device using a computer by installing the LG Mobile Play software on your computer and then connecting the device to the computer using a USB cable. Once the device is detected, select "Settings" and then "Backup and Restore." From there, select "Factory data reset" and confirm the action. 4. Using Android Debug Bridge (ADB): This is a command-line tool that can be used to reset the device on a computer. First, enable USB debugging on the device and then connect the device to the computer using a USB cable. Open a command prompt and enter the command "adb reboot recovery." This will boot the device into recovery mode, and you can then select "Wipe data/factory reset" to erase all user data and settings on the device. It's important to note that resetting or factory restoring a device will erase all user data and settings, so it's important to make a backup of any important data before performing a reset. Additionally, it's recommended to only reset the device if it is experiencing severe problems or malfunctions, as resetting the device too frequently can cause damage to the device's hardware.