How to reset or factory restore Lenovo Legion Y700 device?
There are two main ways to reset or factory restore a Lenovo Legion Y700 device:
1. Using the Lenovo Genuine Developer Reset Tool:
This method involves using the Lenovo Genuine Developer Reset Tool (LGRS) to perform a hard reset. This tool is provided by Lenovo for Legion Y700 devices to reset it to its factory settings.
Before proceeding with this method, ensure that your device is turned off and has enough battery charge. The minimum required battery charge is 21%, and it's best to charge your device completely before performing a hard reset.
Follow the steps below:
a. Go to the Lenovo Support website () and navigate to the Legion Y700 support page.
b. Download the LGRS software from the official Lenovo Support website.
c. Open the LGRS application and connect your Lenovo Legion Y700 device using a USB cable to your computer.
d. Ensure all the relevant items, such as your device model and firmware, are selected correctly.
e. Click "Restore" and follow the instructions provided by the tool. You will be prompted to confirm the reset.
f. After the reset process is complete, your device will reset to its factory settings, and the LGRS application will automatically update the firmware before disconnecting.
2. Using a Computer:
This method involves using a computer to access the BIOS settings on your Lenovo Legion Y700 device.
Before proceeding with this method:
a. Ensure your device is not connected to a power source or any other device.
b. Battery should be drained completely or removed.
c. Turn off your device completely.
d. Make sure your computer's operating system is compatible with your Lenovo Legion Y700 device.
e. Have a USB bootable flash drive ready with the Lenovo Legion Y700 drivers and recovery package installed.
f. Connect your Legion Y700 device to the computer using a USB cable.
g. In your computer, go to "Recovery Device" in the "Computer and Internet" section under "Control Panel" or "Settings." Ensure the USB drive is listed as the "Recovery Device."
h. Restart your device and press the "Fn" key repeatedly until the F5 key is flashed on your screen. This will access the recovery image.
i. Once you're in the recovery screen, select "Factory data reset" and follow the onscreen instructions.
j. After the reset process is complete, your device will reset to its factory settings.
Note: This method may void your device's warranty, so use it with caution. It's recommended to use the LGRS tool whenever possible.
