How to reset or factory restore Lenovo IdeaTab S6000H device?
Lenovo IdeaTab S6000H is a tablet that runs on Android operating system. Resetting or factory restoring a Lenovo IdeaTab S6000H will erase all data and settings on the tablet and restore it to its original condition. This can be helpful if you need to sell or donate your tablet, or if you want to start fresh with a clean slate. There are several ways to reset or factory restore a Lenovo IdeaTab S6000H, and we will discuss the most common and recommended methods below.
Method 1: Using Recovery Mode
Tools Required:
- USB to USB cable
- APC FlashEngin Loader (optional but recommended)
- Lenovo IdeaTab S6000H driver
Step 1: Backup all data
It is important to backup all data before starting the reset process, as you will lose all data once the device is reset.
Step 2: Connect the USB cable
Connect the USB cable to the Lenovo IdeaTab S6000H and to your computer.
Step 3: Boot into Recovery Mode
Power off the device, then press and hold the Volume key + Power key for several seconds until the recovery mode appears. You can also use the APC FlashEngin Loader to put the device into recovery mode.
Step 4: Wipe Cache/factory reset
Once the recovery mode is active, select the “Wipe Cache/factory reset” option using the Volume keys. Confirm the process by selecting “Yes-erase all user data/factory reset all data”.
Step 5: Reboot the device
After the reset process is completed, reboot the device by selecting “Reboot system now”. The device will start rebooting, and you will be greeted with the welcomed message on your tablet.
Method 2: Using OEM Reset tool
Tools Required:
- OEM Reset tool
- A valid Lenovo service account (optional but recommended)
Step 1: Backup all data
It is important to backup all data before starting the reset process, as you will lose all data once the device is reset.
Step 2: Connect the device to the computer
Connect the Lenovo IdeaTab S6000H to your computer using a USB to USB cable.
Step 3: Download and install OEM Reset tool
Download and install the OEM Reset tool on your computer. If you have a valid Lenovo service account, use it to log in to the OEM Reset tool.
Step 4: Reset the device
Once logged in, select the Lenovo IdeaTab S6000H from the devices list and select the option to reset the device. Confirm the reset process and wait for it to complete.
Step 5: Reboot the device
After the reset process is completed, reboot the device by selecting “Reboot system now”. The device will start rebooting, and you will be greeted with the welcomed message on your tablet.
Note: It is recommended to use the APC FlashEngin Loader method to restore the device, as it allows you to ensure that all data is completely erased from the device. Using the OEM Reset tool option may leave some data on the device, which could potentially cause issues later on.
In conclusion, resetting or factory restoring a Lenovo IdeaTab S6000H is a straightforward process that can be done using several methods. It is important to backup all data before starting the reset process and to use a reliable method to ensure that all data is completely erased from the device.
