How to reset or factory restore Lenovo A706 device?
Lenovo A706 is a budget smartphone that comes with Android OS. If you are facing any software issues, your device is running slow, or you want to reset it to a clean state, you can use one of the following methods to reset or factory restore your Lenovo A706 device. These methods are recommended as they are official and have been tested by many users. So, let's take a look at each of these methods step by step.
Method 1: Use the Android 9.0 Reset option
This method and steps are applicable only for Lenovo A706 running on Android 9.0.
1. Go to Settings on your Lenovo A706 device.
2. Scroll down and select Backup & Reset.
3. On the Backup & Restore screen, select Factory Data Reset under Reset all data.
4. A pop-up message will appear warning you about the data that will be lost during the reset process. Make sure you read it carefully, then select yes or ok to proceed.
5. Wait for the reset process to complete. It may take several minutes, depending on the speed of your device.
6. After the reset process is complete, you will be prompted to set up your device. Follow the on-screen instructions to set up the device.
Method 2: Using the recovery boot menu
This method and steps are applicable for all versions of Android running on Lenovo A706.
1. Turn off your Lenovo A706 device.
2. Boot your device into recovery mode by pressing and holding the power button and the Vol+ button at the same time.
3. Release the Vol+ button when the bootloader logo appears on your device screen.
4. Select affection device lead
5. Select total writeout under Camera package set
6. Select Backup and Restore under Backup and Restore section.
7. Select Delete all data and cache under Backup and Restore screen.
8. Tap the preference menu button and select Factory data reset under settings.
9. Tap the Factory data reset button and select Yes- Yes – to proceed.
10. The system reset will begin, and your device will reboot to the home screen.
Method 3: Using ADB Console Command
This method requires a computer with USB cable and the Android SDK platform tools installed on it.
1. Connect your Lenovo A706 device to your computer using a USB cable.
2. Open the command prompt or ADB Console on your computer.
3. Type the following command to reboot your device into recovery mode:
adb reboot recovery
4. Once the device is in recovery mode, select Backup and Restore from the Backup menu.
5. Select Delete all data and cache from the Backup and Restore menu.
6. Wait for the reset process to complete.
7. After the reset process is complete, select Reboot system to complete the process and return the device to the home screen.
Note: You need to make sure you have backed up all your important data before attempting any reset process, as all of your data will be lost during the reset process.
