How to reset or factory restore Lenovo A7000 Plus device?
To reset or factory restore a Lenovo A7000 Plus device, there are several common and recommended methods that you can use. Here are the most common and recommended methods:
Method 1: Recovery Mode Restore
To reset your Lenovo A7000 Plus device through Recovery Mode Restore, follow these steps:
1. Turn off your Lenovo A7000 Plus device.
2. Press and hold the POWER button and the VOLUME UP button together until the Lenovo logo appears.
3. Release both buttons.
4. The Recovery Mode screen will appear.
5. Use the VOLUME UP and VOLUME DOWN buttons to scroll down to "Wipe data/factory data".
6. Press the POWER button to select "Yes - delete all user data".
7. Wait for the device to wipe all the data and restore itself to its default factory settings.
8. Once the restoration process is complete, select "Reboot system now" to restart your device.
Method 2: Bootloader Restore
To reset your Lenovo A7000 Plus device through Bootloader Restore, follow these steps:
1. Turn off your Lenovo A7000 Plus device.
2. Connect your device to your computer using a USB cable.
3. Open a Command Prompt window on your computer.
4. Type the following command to enter Fastboot Mode: fastboot devices
5. Verify that your device is listed by checking the device ID.
6. Install the latest USB drivers for your device.
7. Type the following command to reboot your device into Fastboot Mode: fastboot reboot bootloader.
8. Once the device is in Fastboot Mode, type the following command to check for available firmware updates: fastboot devices.
9. Verify that your device is listed by checking the device ID.
10. Type the following command to flash the latest firmware update onto your device: fastboot flash firmware firmware.img.
11. Wait for the device to reboot and return to Fastboot Mode.
12. Type the following command to reboot your device: fastboot reboot.
13. That's it! Your device has been restored to its default factory settings.
Method 3: test mode restore
To reset your Lenovo A7000 Plus device through Test mode restore, follow these steps:
1. Turn off your Lenovo A7000 Plus device.
2. Press and hold the POWER button and the HOME button together until the Lenovo logo appears.
3. Release both buttons.
4. The Test Mode screen will appear.
5. Use the VOLUME UP and VOLUME DOWN buttons to scroll down to "Factory Reset".
6. Press the HOME button to select "Factory Reset".
7. Wait for the device to wipe all the data and restore itself to its default factory settings.
8. Once the restoration process is complete, press and hold the HOME button and the POWER button together for 10 seconds to exit Test Mode.
9. That's it! Your device has been restored to its default factory settings.
Please note that factory resetting your device will erase all your personal data, stored data and settings. Therefore, it's important to make a backup of your important data before factory resetting your device.
