How to reset or factory restore LeEco Le Max 2 device?
Resetting or factory restoring a LeEco Le Max 2 device is a common task performed when the device is experiencing lag, freezing, or any other performance issues. There are different ways to reset the device, and some of them can cause loss of data. The following are the most common and recommended ways to reset a LeEco Le Max 2 device:
Method 1: Using Recovery Mode
1. Switch off the device
2. Press and hold the Volume Down and Power buttons at the same time until the LeEco logo appears on the screen.
3. Release the Volume Down button and keep pressing the Power button until Recovery Mode appears.
4. In Recovery Mode, select the option "Wipe Data/Factory Reset" and use the Volume buttons to confirm.
5. Select "Yes -- Delete all user data on the device" and click "OK."
6. The device will start the resetting process, which can take several minutes.
Method 2: Using Power Button
1. Switch off the device.
2. Press and hold the Power button for about 30 seconds until the LeEco logo appears.
3. Release the Power button, and press and hold the Volume Down button.
4. Keep holding the Volume Down button until the Recovery Mode appears.
5. In Recovery Mode, select "Wipe Data/Factory Reset" and use the Volume buttons to confirm.
6. Select "Yes -- Delete all user data on the device" and click "OK."
7. The device will start the resetting process, which can take several minutes.
Method 3: Using Backup and Restore
1. Connect the device to a computer using a USB cable.
2. Install LeEco Mobile Assistant on the computer.
3. Launch the Mobile Assistant and log in to the device.
4. Click on the "Backup" option and select "Full Backup."
5. Choose the location where you want to save the backup file and click "Backup Now."
6. Wait for the backup to complete.
7. Disconnect the device from the computer.
8. Switch off the device.
9. Press and hold the Power and Volume Down buttons at the same time until the LeEco logo appears.
10. Release the Volume Down button and keep pressing the Power button until Recovery Mode appears.
11. In Recovery Mode, select "Wipe Data/Factory Reset" and use the Volume buttons to confirm.
12. Select "Yes -- Delete all user data on the device" and click "OK."
13. After resetting the device, connect it to the computer and launch Mobile Assistant.
14. Click on the "Restore" option and select "Back Up..."
15. Navigate to the backup file you created in step 4 and select it.
16. Click "OK" to start the restoration process.
17. Wait for the restoration to complete.
It is essential to note that restoring from backup may take longer than just resetting the device, and there is a risk of losing some data. It is recommended to backup important data before restoring or resetting the device.
