How to reset or factory restore Lava Z90 device?
Resetting a Lava Z90 device can be useful in case it is not working properly, you are facing various bugs and issues, or you want to start fresh and erase all data from the device. There are multiple ways to reset a Lava Z90 device, but the most common and recommended ways are as follows:
1. Hard Reset (Power Button)
The first method is to perform a hard reset by pressing and holding the power button for several minutes until the phone shuts down completely. Then, press and hold the power button again to turn the phone back on. Repeat this process multiple times until the Lava Z90 logo appears on the screen. Once you see the logo, use the volume keys to select the “Wipe data/factory reset” option and press the power button to confirm your choice.
2. Recovery Menu
The second method is to use the recovery menu method. Insert your Lava Z90 device into a USB port or any PC device with USB connectivity. Turn off your phone and then press the power button to enter recovery mode. Then, choose the “Wipe data/factory reset” option and confirm it.
3. Fastboot
The third method is to use the fastboot method. This method requires a computer with a fastboot tool installed. Connect your Lava Z90 device to the computer using the USB cable and turn off your phone. Open a command prompt and navigate to the directory where fastboot is installed. Then, use the command “fastboot flash partition primary” to delete the primary partition. After the primary partition is deleted, use the command “fastboot format” to format the entire internal storage.
4. Delete Internal Storage
The fourth method is to delete the internal storage using the “Backup and Reset” option in the Lava Z90 settings menu. Go to Settings > Backup and Reset > Erase all the user data and settings. This method erases the entire internal storage of the phone, including all apps, data, and settings, but it also leaves the device bootable. This method can be useful if you are facing minor issues or bugs, and you don't want to lose all your data.
In conclusion, these are the most common and recommended ways to reset a Lava Z90 device. Depending on your requirements, you can choose the method that suits you best. Remember, always back up your data before performing any reset method to avoid losing important files.
