How to reset or factory restore Lava X28 Plus device?
Resetting or factory resetting a Lava X28 Plus device can be helpful if you're experiencing various issues, such as slow performance, crashing apps, and software malfunctions. However, it should be noted that this process will erase all data on your device, including saved files, contacts, settings, and other important information. Therefore, it's essential to back up your data before proceeding with this procedure.
Here are the most common and recommended ways to reset or factory restore a Lava X28 Plus device:
Method 1: Using the recovery menu and recovery flash
1. Turn off your Lava X28 Plus device.
2. Press and hold the Volume Down button and the Power button simultaneously until the recovery menu appears.
3. If it doesn't show up after a few seconds, try pressing the Volume Down button, then Power, and then Power again.
4. Once in the recovery menu, select the “Backup/Restore” option.
5. In case you haven't backed up your data, you can choose to create a backup of your current data.
6. After creating a backup, select “Factory Data Reset” or “Wipe data/factory reset.”
7. Wait for the process to complete. It may take a few minutes.
8. Once the reset is complete, select “Reboot system now.”
Method 2: Using a computer and USB cable
1. Connect your Lava X28 Plus device to your computer using a USB cable.
2. Download and install Lava X28 Plus USB Drivers on your computer. You can find them on Lava's official website or through a trusted download site.
3. Open a command prompt on your computer and navigate to the folder where you installed the USBS drivers.
4. Type the following command and hit enter: “C:\Program Files (x86)\ericsson\Binary\lava_emmc_download.exe”
5. Before entering the command, make sure that your Lava X28 Plus device is connected and turned off.
6. Your device should now enter “Fast Boot” mode.
7. Press and hold the Volume Down button and the Power button simultaneously until the recovery menu appears.
8. Select the “Wipe data/factory reset” option.
9. Wait for the process to complete. It may take a few minutes.
10. Once the reset is complete, select “Reboot system now.”
Method 3: Using Lava Care Portal
1. Access your Lava X28 Plus device through a computer's internet connection.
2. Visit the Lava Care Portal website ().
3. Sign in with your Lava account or create a new one if you don't have one.
4. Select your Lava X28 Plus device model from the drop-down list.
5. Click on the "Reset to factory settings" option.
6. Confirm the process, and your device will start resetting.
It's worth noting thatMethod 2 and 3 are recommended methods as these require you to download and install drivers on the computer or access your device's settings through the internet, ensuring you have all the latest firmware versions. The first method is a reliable method, but it requires you to have the recovery menu flash on your device, which might not be available in some cases.
