How to reset or factory restore Lava Iris 405+ device?
Here are the most common ways to reset or factory restore a Lava Iris 405+ device:
1. Using the recovery menu:
a. Turn off the device.
b. Press and hold the Volume down button and the Power button simultaneously until the recovery menu appears.
c. Select "Wipe data/factory reset" using the Volume keys and press the Power key to confirm.
d. Wait for the device to reset, which may take a few minutes.
e. Once the reset is complete, select "Reboot system" and press the Power key to restart the device.
2. Using a computer and the Lava Iris 405+ driver:
a. Connect the device to the computer using a USB cable.
b. Install the Lava Iris 405+ driver on the computer, which can be found on the Lava website or the manufacturer's website.
c. Open a command prompt on the computer and enter the following command: fastboot flash recovery recovery.img
d. Wait for the device to boot into recovery mode.
e. Select "Wipe data/factory reset" using the Volume keys and press the Power key to confirm.
f. Wait for the device to reset, which may take a few minutes.
g. Once the reset is complete, select "Reboot system" and press the Power key to restart the device.
3. Using the Lava Iris 405+ recovery image:
a. Download the Lava Iris 405+ recovery image from the Lava website or the manufacturer's website.
b. Connect the device to the computer using a USB cable.
c. Open a command prompt on the computer and enter the following command: fastboot flash recovery recovery.img
d. Wait for the device to boot into recovery mode.
e. Select "Wipe data/factory reset" using the Volume keys and press the Power key to confirm.
f. Wait for the device to reset, which may take a few minutes.
g. Once the reset is complete, select "Reboot system" and press the Power key to restart the device.
It is recommended to perform a factory reset only if the device is experiencing severe issues that cannot be resolved through other means. Performing a factory reset will erase all data on the device, including contacts, messages, and files, so it should only be done as a last resort.
