How to reset or factory restore Lava Flair E2 device?
The Lava Flair E2 is an affordable smartphone that runs on the Android operating system. If you face any issues with your device and want to reset it to its factory settings, there are several ways to do so. In this article, we will discuss the most common and recommended methods to reset or factory restore a Lava Flair E2 device.
Method 1: Using the built-in recovery menu
1. Turn off your Lava Flair E2 device.
2. Press and hold the Volume Up key and the Power button simultaneously until the phone goes into recovery mode.
3. Scroll down and select "wipe data/factory reset".
4. Select "Yes, delete all user data".
5. Wait for the device to reset.
6. After the reset is complete, reboot your device.
Method 2: Using a PC
1. Connect your Lava Flair E2 device to your PC using a USB cable.
2. Download the Lava Flair E2 firmware from the official website.
3. Install the firmware on your device using a software such as Android SDK Platform-Tools.
4. Reboot your device and wait for it to boot up completely.
Method 3: Using a hardware reset button
1. Turn off your Lava Flair E2 device.
2. Press and hold the Volume Down key, the Power button, and the Home button simultaneously until the phone goes into recovery mode.
3. Scroll down and select "Reboot system".
4. Wait for the device to restart and boot up completely.
Note: Using the hardware reset button is a more extreme method and should only be used as a last resort. This method will erase all data on your device and cannot be reversed.
It is recommended to use the built-in recovery menu as it is a safer and more reliable method to reset your device. However, if you still encounter issues after using the recovery menu, you can try using one of the other methods. It is always a good idea to back up your important data before resetting your device.
