How to reset or factory restore Lava A79 device?
Sure! Here are the most common and recommended ways to reset or factory restore a Lava A79 device:
1. Using the physical buttons:
- Press and hold the Volume Down and Power buttons at the same time.
- Release both buttons when the Lava logo appears on the screen.
- Press and hold the Volume Down button until the reset option appears on the screen.
- Use the Volume buttons to select "Yes - Reset to defaults" and press the Power button to confirm.
2. Using a computer:
- Connect your Lava A79 device to your computer using a USB cable.
- Make sure that your device is recognized by your computer and that you have the latest drivers installed.
- Download and install the Lava A79 USB driver from the manufacturer's website.
- Open a command prompt on your computer and navigate to the directory where the Lava A79 device is connected.
- Type "adb reboot bootloader" to reboot your device into the bootloader mode.
- Type "fastboot flash recovery recovery.img" to flash the recovery image on your device.
- Reboot your device into recovery mode by unplugging the USB cable and pressing and holding the Power button.
- In the recovery menu, select "Wipe data/factory reset" and confirm that you want to reset your device.
3. Using a recovery app:
- Install a recovery app on your Lava A79 device, such as SuperSU or recovery manager.
- Open the recovery app and select "Wipe data/factory reset".
- Confirm that you want to reset your device and wait for the process to complete.
Note: Be sure to back up any important data before resetting your device to avoid losing your files. It is also recommended to only reset your device if you are experiencing a serious issue that cannot be resolved through other means.
