Kyocera DuraForce XD

Home/ Kyocera/ Phones/ DuraForce XD

Table of Contents

Summary

Kyocera DuraForce XD Price

The retail price of a new or used/second hand Kyocera DuraForce XD varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Kyocera DuraForce XD across different regions, markets and countries.

Frequently Asked Questions(FAQs)

How to reset or factory restore Kyocera DuraForce XD device?

Resetting or factory restoring a Kyocera DuraForce XD device involves wiping all software, data, and settings, returning the device to its original state, and restoring the operating system and applications. Here are the most common and recommended ways to reset or factory restore a Kyocera DuraForce XD device: Using Hard Reset (Total Wipe) ----------------------------- * Turn off the device. * Press and hold the home button and power button simultaneously until the Kyocera logo appears on the screen. * Release both buttons and wait for the menu screen to appear. * Scroll to "Reset to factory settings" and press the OK button. * Wait for the device to reset and the Kyocera logo to appear again. * Set up the device as if it were new. Using Software Restore (ADB Link) --------------------------------- * Back up all important data from the device. * Connect the device to a computer using a USB cable. * Install the Android Debug Bridge (ADB) software on the computer. * Open a command prompt on the computer and navigate to the folder where the Kyocera firmware file is located. * Type the following command and press enter: `adb reboot bootloader` * Select the firmware file using the volume up and down buttons on the device. * Wait for the device to restart and for the Kyocera logo to appear. * Set up the device as if it were new. Using Device Manager (Advanced Restore) -------------------------------------- * Back up all important data from the device. * Connect the device to a computer using a USB cable. * Open the Device Manager on the computer and locate the Kyocera device. * Right-click on the device and select "Properties". * Click on "Driver" and then "Advanced". * Click on "Function driver" and select the appropriate driver from the drop-down menu. * Click on "OK" and then on "Boot Loader". * Click on "Write to black box". * Select the firmware file using the browse button. * Wait for the device to restart and for the Kyocera logo to appear. * Set up the device as if it were new. Note that it's important to choose one of these methods carefully, as each one has its own pros and cons, and some of them may require technical expertise. Before attempting any restoration process, be sure to back up all important data, and consider contacting Kyocera customer support if you're unsure about the best method for your specific device and circumstances.

What is the display size of Kyocera DuraForce XD?

5 inches

What is the battery capacity of Kyocera DuraForce XD?

3240 mAh

What is the RAM size of Kyocera DuraForce XD?

4 GB

Specifications

Network

Technology: GSM / HSPA / LTE
2G bands: GSM 850 / 900 / 1800 / 1900
3G bands: HSDPA 850 / 900 / 1900 / 2100 - AT&T, T-Mobile
4G bands: 1, 2, 3, 4, 5, 7, 17, 20, 29 - AT&T
: 1, 2, 3, 4, 5, 7, 12, 20, 29 - T-Mobile
Speed: HSPA, LTE

Launch

Announced: 2015, October. Released 2015, November
Status: Discontinued

Body

Dimensions: 166.8 x 86.4 x 13.9 mm (6.57 x 3.40 x 0.55 in)
Weight: 307 g (10.83 oz)
SIM: Nano-SIM
: IP68 dust/water resistant (up to 1.5m for 30 min) MIL-STD-810G compliant

Display

Type: IPS LCD
Size: 5.7 inches, 89.6 cm2 (~62.1% screen-to-body ratio)
Resolution: 720 x 1280 pixels, 16:9 ratio (~258 ppi density)
Protection: Yes

Platform

OS: Android 5.1 (Lollipop)
Chipset: Qualcomm MSM8928 Snapdragon 400 (28 nm)
CPU: Quad-core 1.6 GHz Cortex-A7
GPU: Adreno 305

Memory

Card slot: microSDXC (dedicated slot)
Internal: 16GB 2GB RAM
: eMMC 4.5

Main Camera

Single: 8 MP, AF
Features: LED flash, HDR, panorama
Video: 1080p@30fps

Selfie camera

Single: 2 MP
Video:

Sound

Loudspeaker: Yes
3.5mm jack: Yes

Comms

WLAN: Wi-Fi 802.11 a/b/g/n/ac//r/k, dual-band, Wi-Fi Direct, hotspot
Bluetooth: 4.1, A2DP, EDR, LE
Positioning: GPS
NFC: Yes
Radio: No
USB: microUSB 2.0