Kyocera DuraCore E4210

Home/ Kyocera/ Phones/ DuraCore E4210

Table of Contents

Summary

Kyocera DuraCore E4210 Price

The retail price of a new or used/second hand Kyocera DuraCore E4210 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Kyocera DuraCore E4210 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery life of the Kyocera DuraCore E4210?

The Kyocera DuraCore E4210 has a battery life of up to 8 hours.

What type of processor does the Kyocera DuraCore E4210 have?

The Kyocera DuraCore E4210 has a 1GHz dual-core processor.

What type of display does the Kyocera DuraCore E4210 have?

The Kyocera DuraCore E4210 has a 4-inch WVGA touchscreen display.

How to reset or factory restore Kyocera DuraCore E4210 device?

The Kyocera DuraCore E4210 is a rugged phone that is designed to withstand tough conditions and provide long-lasting performance. If you need to reset or factory restore the device, there are a few common and recommended methods to follow: Method 1: Using the device’s built-in reset feature 1. Power on the device. 2. Tap and hold the number "0" key on the keypad. 3. Listen for the device to enter the reset menu. 4. You may be prompted to enter your PIN. Enter your PIN and tap on "OK" or "Confirm." 5. Select "Erase All User Data/Factory Reset Data." 6. Confirm your selection by tap on "OK" or "Confirm." 7. Wait for the device to complete the reset process. Method 2: Using the device’s recovery mode 1. Turn off the device. 2. Power on the device and press and hold the "Volume Down" key + the "Power" button until the device enters recovery mode. 3. With the volume buttons, navigate to the "Wipe data/factory reset" option. 4. Press and hold the "Power" button to select the option. 5. Wait for the device to perform the reset process. Method 3: Using the device and PC 1. Connect the device to your computer using a USB cable. 2. Install the Kyocera software on your computer. 3. Launch the Kyocera software and select "Erase All Data/Factory Reset Data." 4. Follow the on-screen instructions to complete the reset process. Note: Before resetting the device, make sure to back up any important data to a computer or external storage device. Resetting the device will erase all user data and not recover it. Also, before resetting the device with PC, a password must be known to access the device. If the password is not known, there is no way to reset the device.

Specifications

Network

Technology: CDMA / EVDO
2G bands: CDMA 800 / 1900
3G bands: CDMA2000 1xEV-DO
Speed: EV-DO Rev.A 3.1 Mbps

Launch

Announced: 2011, July
Status: Discontinued

Body

Dimensions: 98.5 x 49.8 x 23.9 mm (3.88 x 1.96 x 0.94 in)
Weight: 126 g (4.44 oz)
SIM: Mini-SIM
: MIL-STD 810G-grade salt, fog, humidity, transport shock and thermal shock resistant

Display

Type: TFT, 256K colors
Size: 2.0 inches, 12.4 cm2 (~25.3% screen-to-body ratio)
Resolution: 240 x 320 pixels, 4:3 ratio (~200 ppi density)
: External 1" monochrome display, 96 x 64 pixels