i-mate PDAL

Home/ i-mate/ Phones/ PDAL

Table of Contents

Summary

i-mate PDAL Price

The retail price of a new or used/second hand i-mate PDAL varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of i-mate PDAL across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery life of the i-mate PDAL?

The battery life of the i-mate PDAL is up to 5 hours talk time and up to 200 hours standby time.

What type of display does the i-mate PDAL have?

The i-mate PDAL has a 2.8 inch TFT LCD display with a resolution of 320 x 240 pixels.

How to reset or factory restore i-mate PDAL device?

Usually, when a user faces various issues with their i-mate PDAL device, they can try resetting or factory restoring their device to restore its original state and solve the problem. Here are the most common ways to reset or factory restore i-mate PDAL devices: 1. Using Hardware Restart: Turn off the device and remove the battery. Press and hold the power button, volume up, and volume down buttons simultaneously for about 20 seconds. This will trigger the bootloader mode, and you can see i-mate logo on the screen. Once you see the i-mate logo, connect the device to the charger and wait for it to charge up completely. After charging, press and hold the power button, and release it to enter the home screen again. 2. Using OTA (Over the Air) Update: If you have a sufficient internet connection, you can try an over-the-air update. This method will restore the device to its factory settings, and it may take some time. Here's how to do it: * Go to Settings > Device Settings > About Phone > Software > Check for Updates. * If an update is available, accept it. * The device will start restarting and resetting. 3. Using Computer: If you have a computer with a USB port, you can connect the i-mate device to the computer and use software tools to reset or factory restore the device. Here's how to do it: * Make sure your computer has the USB drivers for your i-mate device. * Connect the device to the computer using a USB cable. * Open the device driver software on your computer and check for firmware updates. * If it's available, install the update. * Disconnect the device from the computer. * Press and hold the power button, volume up, and volume down buttons simultaneously for about 20 seconds. * Wait for the bootloader mode to appear. * Connect the device to the charger and wait for it to charge up completely. * After charging, boot into recovery mode. * Select the option to erase all data/factory reset the device. * Wipe the data, and the device will restart to its factory settings. Note: These methods are risky, and you must take a back of your data before attempting to reset or factory restore the device. Also, always use the official software tools to avoid data loss or device damage.

What type of processor does the i-mate PDAL have?

The i-mate PDAL is powered by a 400 MHz Intel XScale processor.

Specifications

Network

Technology: GSM
2G bands: GSM 850 / 900 / 1800 / 1900
GPRS: Class 10
EDGE: Class 10

Launch

Announced: 2006, November
Status: Discontinued

Body

Dimensions: 112 x 56 x 17 mm (4.41 x 2.20 x 0.67 in)
Weight: 116 g (4.09 oz)
SIM: Mini-SIM

Display

Type: TFT resistive touchscreen, 65K colors
Size: 2.4 inches, 17.8 cm2 (~28.4% screen-to-body ratio)
Resolution: 320 x 240 pixels, 4:3 ratio (~167 ppi density)
: Handwriting recognition