How to reset or factory restore Huawei MediaPad M6 Turbo 8.4 device?
The Huawei MediaPad M6 Turbo 8.4 tablet can be reset to its factory settings or restored from a backup if it becomes frozen, has stopped working properly, or has been lost or stolen. Here are the most common and recommended ways to reset or factory restore a Huawei MediaPad M6 Turbo 8.4 device:
1. Backup Data Bypass Resetting:
It's always recommended to back up all important data, including contacts, messages, photos, and files, before attempting to reset or factory restore a device. In case data backup can't be done, the user must consider bypassing the lock screen before attempting to reset or factory restore the device.
2. OEM Resetting:
The easiest way to reset a device to its factory settings is to use the OEM (Original Equipment Manufacturer) reset method. OEM reset requires a computer with a USB cable and the Huawei HiLink Lite Client (HyLink) software. Here are the steps to perform an OEM reset:
- Connect the device to the computer using the USB cable.
- Install the HyLink software on the computer.
- Open the HyLink software and select the device from the list of available devices.
- Select the "Backup Battery Full" option.
- Press and hold the power, volume up, and volume down buttons simultaneously for about 30 seconds until the Huawei logo appears.
- Release the buttons and connect the device to the computer using the USB cable.
- Select the "Reset All Data/Factory Data Reset" option in the HyLink software.
- Wait for the device to reset.
Note: This method deletes all user data and settings on the device, including security lock screen password, fingerprint, and face recognition data. It's important to backup any important data before performing an OEM reset.
3. Recovery Boot Resetting:
Recovery boot reset is another way to restore a device to its factory settings. Recovery boot allows the user to access the device's recovery menu, where user can select to reset or factory reset the device to its original state. Here are the steps to perform a recovery boot reset:
- Turn off the device.
- Press and hold the power and volume down buttons simultaneously until the Huawei logo appears.
- Release the buttons and select the "Wipe data/factory data reset" option.
- Wait for the device to reset.
Note: This method deletes all user data and settings on the device, including security lock screen password, fingerprint, and face recognition data. It's important to backup any important data before performing a recovery boot reset.
4. Update Recovery Firmware:
In some cases, a device may have a faulty firmware that prevents it from performing a factory reset or recovery boot reset. In such cases, updating the recovery firmware may be the only option to restore the device to its factory settings. To update the recovery firmware, follow these steps:
- Connect the device to the computer using the USB cable.
- Install the Huawei HiLink Lite Client (HyLink) software on the computer.
- Open the HyLink software and select the device from the list of available devices.
- Select the "Unlock Bootloader" option.
- Follow the on-screen instructions to complete the unlock bootloader process.
- Select the "Recovery Mode\" option.
- Wait for the device to boot into recovery mode.
- Select the "Wipe data/factory data reset" option.
- Wait for the device to reset.
Note: This method requires the unlock bootloader to be enabled on the device. It's important to backup any important data before performing an update recovery firmware reset.
